R33 GTR Brembo Caliper Rebuild Kit

[R33-East]

I am getting my calipers powder coated and I need to find a rebuild kit. Does anyone know if Nissan have these or will I have to get them elsewhere?

[M-type]

if so is there a rebuild kit for r32 gtst stock calipers too?

[dustyGTR]

You have a couple of options, I had my Porsche big reds powder coated and rebuilt them recently before fitting to my old Audi S6. You can buy Brembo original parts which can get quite expensive and if memory serves correctly are only sold with new pistons seals and dust boots from several places, or you can buy seals and dust boots from Stoptech (much cheaper) as they use the same type of seals as Brembo you just need to measure the piston size. Mine have been in for quite some time and are working well I used the silicone dust boots which are supposed to hold up very well to high temps.

[dustyGTR]

Or here they sell the seals http://www.zeckhausen.com/Brembo/Consumables.htm#Rebuild, but I think Stoptech still cheaper.

[R33-East]

Thanks a lot for the info, I will check those places out.

[R33-East]

I don't have my calipers off yet so I never got a chance to check the diameter of the pistons. I searched and found this http://forums.gtrcanada.com/faq/2021...formation.html which says 44mm for the front and 40mm for the rear. This info looks to be correct but can anyone confirm? I don't want to order the wrong size

[Daryl @ RightDrive]

We sell the rebuild kits for both Brembo and regular Nissan calipers. PM if you would like pricing.

[support@feastauto]

Pricing sent on the rebuild seal kit.

[cobrAA]

what is the price' I could be interesting also?