If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Has anyone done a swap or knows which is easiest because if the all wheel drive i dont know how well a rb25 will work for AWD, also if I need anything else for the swap please post .
Correct me if i'm wrong, but rb25 would be the easiest swap and should bolt right up no problem. You can of course go rb26 as well with a bit more work. I may be wrong but I believe this is correct.
91 gtr , 93 rx7 type r and a multicolor 240 スカイライン
RB26 would be the way to go,it bolts up to the GTS-4 and retains the awd feature. My GTS-4 came from Japan with the swap already done, its like a GTR without the wide body. Do it.
Stagea awd neo rb25 and that would be good but there is a better option... There will be some reworking that will be needed but besides that it's all plug and play for the rb26. Been there done that lol. If you need anything else pm me
Miss driving sooooo bad! Need to get a car on the road ASAP!
Stagea awd neo rb25 and that would be good but there is a better option... There will be some reworking that will be needed but besides that it's all plug and play for the rb26. Been there done that lol. If you need anything else pm me
Soo the 26 is more or less a drop in? What is the wiring like? I am also exploring options for my gts4.
Sent from my iPhone using Tapatalk
1989 R32 Skyline GTR SOLD!!!!
The key to immortality is first living a life worth remembering.
-Bruce Lee
I used the 26 harness but the car already came prewired. I was told you need to change a plug or two behind the kick panel on pass side but other than that nope nothing else
Miss driving sooooo bad! Need to get a car on the road ASAP!
Comment