Wich size Rota/Varstooen for R32?

[Akula]

So,Volk TE37 are too expensive so I will go for replica from Rota (Grid) or Varstooen (S200).wich size can I go on a stock setup (no rub)?
i was thinking about 18 inch and 9.5 or 10 inch wide with 15-25 offset (to get that concave look) ?!
im not going to touge or wangan so replicas will be ok for now.
thanks

[gtrjon]

I assume you are talking on a gtr? if so then 18x10.5 +15 will fit with 265 35 18 all around perfect!

[Akula]

yup,its BNR32.
Thanks

[gtrjon]

Hit up marvin at autodream he will hook you up on some varstoeen wheels! tell him jon sent you.

[cobrAA]

I assume you are talking on a gtr? if so then 18x10.5 +15 will fit with 265 35 18 all around perfect!

depends on your drop I guess.. Mine at 9.5 +12 and I had to SLIGHTLY higher my car so it doesnt rub.

[RABBIT]

http://forums.gtrcanada.com/gt-r-tech/25375-gtr-wheel-fitment-thread.html

[Nvdgtr]

I assume you are talking on a gtr? if so then 18x10.5 +15 will fit with 265 35 18 all around perfect!

with this size would you not have to roll your fenders?

[Michael1992]

depends on offset...

for a GTR I'd run a solid 18x9.5 or 18x10 with a mild stretch on a 9.5 I'd run like a 235/40 and on a 10 a 245/40 this seems to work nicely on 32 gtr's

[Oakville]

18x10.5 +15 fits nicely, with 265/35R18. just cant go suuuper low

[Nvdgtr]

right now i have 17x9 +12 with 255/40 and there good, I want 18s and was thinking 18x9.5 +15 with a 255/35 or 40. Im lowered but not to much, i plan to go lower in the future but not slammed just to get rid of the tire gap. I drive my car once a wknd, if that and plan to track it maybe once a yr, though i haven't but maybe in a few yrs lol

[Akula]

Thanks guys


so what I did is 18x10.5 ET15 Varrstoen on Yokohama Sdrive 265/35 and HSD coilovers...nov I need to roll wheel arches


By akulaturbo at 2012-08-14


By akulaturbo at 2012-08-14

and now i CAN see how roads in Calgary are bad driving my RS2 back home is like driving on carpet in bedroom

[doc]

i have 18x105. +15 up front and 18x10.5 +0 in the rear all on 275/35/18 nitto invo
getting an alignment i will post pics after its done

[Nvdgtr]

Looks good! do u think if u had a 18x9.5 +15 you wouldnt need to roll?

[RABBIT]

Nice stance! Why not raise the car some more?

Sent from my HTC Magic using Tapatalk

[Akula]

...after first run it rubbed...so,it was either to loose weight (im 6ft7 and 260lbs) or to lift it up for inch or so ... easy decision its up now a bit