Project ; Student build CobrAA's GTR

[cobrAA]

Massive battery! lol
Awesome car.. Really digging the EBC and timer setup on the cluster trim.. Difficult to trim without cracking?? I've been looking to put my profec b somewhere other than the cliche steering column trim and this setup is pretty bad ass..

You see any of the readings clearly past the wheel though while driving?

Nice car!!

I see everything because if I wouldn't I would have remove it by the time. I just sand it with a metal bar( like the one you see in prison.).

As for the battery, yeah it's 54lbs of pure power!

[nelsonmxmarc]

So i took your idea and did it with my Profec B 2 install today lol. Looks awesome! And you really can see it clearly.. lots of space behind the trim of it as well, good stuff.

[cobrAA]

So i took your idea and did it with my Profec B 2 install today lol. Looks awesome! And you really can see it clearly.. lots of space behind the trim of it as well, good stuff.

Good job! Hope Your not in my class! I don't want you to copy my exam haha

[canu_50]

only one thing is better than one quebec girl!


two of them

[cobrAA]

This week I did:
- the Climate Control LED MOD
- a custom Ipod stand
- custom made new VOLK RACING decal for my rims
- skyline decal for my strut bar.
- Painted my new MOMO GRID in red.

Pics to follow.

[got_boost!]

Interested to see what you do with the iPod. I've been looking for a clean way to put mine in but still have it easy to remove for updates and whatnot. Is it a newer Touch or one of the older ones?

[cobrAA]

Interested to see what you do with the iPod. I've been looking for a clean way to put mine in but still have it easy to remove for updates and whatnot. Is it a newer Touch or one of the older ones?

a 20 gb ipod photo. But I made it custom-made. so you could custom fit it to your ipod easily.

[cobrAA]

Interested to see what you do with the iPod. I've been looking for a clean way to put mine in but still have it easy to remove for updates and whatnot. Is it a newer Touch or one of the older ones?

there ya go:

In '' real life'' it look beter because our eyes can't really see if it's missing light somewhere, it just look even. Now the camera make it look worse than it is!

[cobrAA]

Here's a couple shot of my last detailling.

[caliber676]

I always just bought the alpine decks with the ipod adaptor cable running into the glovebox. Control everything from the deck, find it a lot easier than shuffling an ipod behind the shifter or playing with those terrible fm transmitters.

[MikeRWK]

I went cheap and ran an aux cable from the back of my pioneer i usually have my laptop for tunes.

[cobrAA]

I always just bought the alpine decks with the ipod adaptor cable running into the glovebox. Control everything from the deck, find it a lot easier than shuffling an ipod behind the shifter or playing with those terrible fm transmitters.

I run the exact samething. I just add some bling factor to this ipod connector.

[cobrAA]

Another Update:

I had to do some transmission work. So, here it's:

2nd and 3th synchro
Brake stopper
Input bearing
resurfacing flywheel
thicker pressure plate
6 puck clutch

Next upgrade will certainly be an alarm system since I will be moving next summer to a not so sure place( lol)

[NismoS-tune]

Just did my Grounding and power kit: I went from 12.2 v to 14v. INSANE UPGRADE!

Uhh is that 12.2V when not running and 14 when running?

[cobrAA]

Uhh is that 12.2V when not running and 14 when running?

no no 12.2- 13v at idle before and 13.8 up to 14.5 after the grounding/big 4 and replacement of battery terminal.