drift car , rb26 kouki

[rbs14]

my first built thread was so hold i decided to refresh it a little and star a new one !!!!

here are the specs :
RB26 Engine Shortblock Build Database:

Block: r33 rb26dett
Rods: EAGLE
Rod Bolts: ARP2000
Pistons: MAHLE 87mm
Pins: MAHLE 21mm
Crank: R33
Main Bearings: acl race
Rod Bearings: acl race
Oil Pump: N1
Water Pump: N1
Timing Belt: Greddy
Cradle/Main Fasteners: ARP
Harmonic Balancer: ROSS metaljacket

---------------------------------------------------------------------

VEHICLE: 1997 240sx
ENGINE: rb26dett r33
MILEAGE: 5000klm
OIL/WATER PUMP: N1 , N1
OILING SYSTEM: TOMEI orifice , TOMEI baffle plate , oil cooler
INJECTORS: sard 800cc
FUEL SYSTEM: drop in TOMEI 255 fuel pump , aeromotive fpr
TURBO SETUP: stock r32
MAP or MAF's: MAP
INTAKE SETUP: Greddy intaque manifold , HKS suction kit (map)
INTERCOOLER: Powered by max mid mount intercooler
VALVETRAIN: stock cam , Greddy cam gear
HEAD WORK: 3 angle valve job , port and polish
EXHAUST: custom donwpipe , 3inch exhaust
BOOST LEVEL: 12psi
ECU SETUP: power-FC d-jetro
CLUTCH: ORC twin plate
DRIVETRAIN F/R: rb25 tranny
SPECIAL NOTES: tuned my Almasy tuning in Delson,QC

DYNO: dynapak
HP: 349 rwhp
TQ: 288 rwtq

[rbs14]

this is where i'm at for now ... intercooler piping and i can drive the car





suspension set-up just done last week

[rbs14]

little photo shoot from last summer

[GavinJohnson]

That's sick man. Loving the build.

[LuckyGTR]

Mtl Represent u know wat it do!!!

[steeldawg_69]

Very nice build, got a similar one here in New York. The only problem I had was clearing the steering column with the downpipe. I ended up getting Mckinney downpipe with the notch in it. How did you clear yours?

[archaeic_bloke]

looking good man, robin right? :O

i like the look you went for on the body, looks mean! and that thing must have immense power in such a light car! way to go... who did the engine work? yourself?

[rbs14]

Very nice build, got a similar one here in New York. The only problem I had was clearing the steering column with the downpipe. I ended up getting Mckinney downpipe with the notch in it. How did you clear yours?

i have mckinney motor mounts but it's a custom donwpipe !!! going around the steering !!!

looking good man, robin right? :O

i like the look you went for on the body, looks mean! and that thing must have immense power in such a light car! way to go... who did the engine work? yourself?

my name is P-O ... Robin was the tuner !!! the engine work was done by Overbore (boring , decking the engine , balancing everything) and i assembled everything back here at my house !!!! engine worked strong last summer cant wait to get it out again !!!

[frankiman]

t'es mon hero p-o

wasn't this an automatic trans USDM S14 you got around Atlanta?

[rbs14]

little update !!!
got my wheels and tools box stollen 4 days ago !!! those fuckers came when i was at work !!! i was working night shift !!!

drift wheel that became dayli wheels
rear fiting :P 17x10 +18 ... -7 with spacer


twin turbo piping mod

[rbs14]

t'es mon hero p-o

wasn't this an automatic trans USDM S14 you got around Atlanta?

yup stock auto s14 ----> too Rb26dett

[frankiman]

i remember seeing you, 2 years ago, the day you came back from atlanta (or whatever US city) at the nissan meet at laval's krispy kreme, with the most prestine S14 ever, telling people you were going to swap an RB, you had the engine's head in the back seat, and a couple other parts in the trunk

i was there with forenz, and my old GTR

and i was looking at the car, like OMG has this car ever been driven ?! it looked brand fawking new

and then you were talking about the RB swap, manual tranny swap, the lot
and i was standing there just thinking 1 thing, ''goold luck buddy!''

but you made the best of it, car looks absolutely incredible, the new RPF1s will be baller and i hope you catch whoever stole your tools and wheels

hope to see you at the track this summer

[rbs14]

yeah i remember you frank ... for sure ill see you at the track maybe not on the good side :P your lapping im drifting

[GTRADDICT]

Nice build!! FYI the HKS shroom filter don't filter well... Don't want to see your rb with 1/2" of crap on the pistons afther 5k... Nice work!!!

[SkyLizzle]

Nice build!! FYI the HKS shroom filter don't filter well... Don't want to see your rb with 1/2" of crap on the pistons afther 5k... Nice work!!!

this group buy might help you out with filters that should be alot better for your engine ^^ Great build man big ups to all the sick cars making names in Canada!! >>> http://forums.gtrcanada.com/group-bu...tml#post493759