drift car , rb26 kouki

[gtrjon]

Bad news ! Its gona cost me an other rebuilt !!!

All 6 cylinders are like that ! I think its a clesrence problem ?!?!?!?

My tuner told me that i could get away with just a hone and some new rings !!! I will send the engine to my engine builder today !

all cylinders are like what?!

[rbs14]

I will post a pic when i get home tonight im on my iphone right now !!! If you guys want to see had me on facebook ( pierre-olivier belisle)

Its my third RB26 that dies on me !!! Im tired of this ****

Im changing the engine set-up in my car !

If some of you guys like some of my parts they will be for sale prety soon ! Im not rebuilding an other RB

[rbs14]

Cylinders are too groved , i would need to sleeve the block and that not a option i wamt to go With

R33 crank is perfect , head is perfect , eagle rod are perfect , even the bearings are still good !!! is just the got damn block and pistons !

[gtrjon]

damn dude thats too bad. do i smell a 2j possibly?

[rbs14]

here is what every piston look like !!!

[gtrjon]

what caused this!? faulty machine work?

[rbs14]

Clearence were to small and the engine ran ton lean ! Top of the piston expended and grip abit ! You can see on the pistons that the are not that damage its just the top on the edge that they are used

[Supraclean]

Sorry to hear man! Worst part is its noting you have control over and obvously was machine shop Best of luck with the new engine setup, Love the rb sounding Drift cars but you gota do what you gota do to slide.

[GTRADDICT]

Clearence were to small and the engine ran ton lean ! Top of the piston expended and grip abit ! You can see on the pistons that the are not that damage its just the top on the edge that they are used

Your talking piston to wall clearance?

[rbs14]

That is what my tuner said ! Piston to wall ! With the heat expension the pistons were to tite

[rbs14]

Well the new tuner that was supose to tune my car ! The old one cost me 2 engine

[GTRADDICT]

HOLY #%?#!%! How can you let that happen! I've never even heard, from where I'm from anyways, of an engine that was wrongly clearenced (New word). Even more so the pistons! Thats some slopy work...

[rbs14]

im preaty sure its more of a tuning problem ... then a machining / clearence problem .... they used the spec that came with the pistons for a turbo application from MAHLE !!!! that tuner in the last year cost just by im atlest 6 engine .... 2 forge rb26 (mine) and 3 of them were sr20 with the same car ... marc landreville un DMCC pro we put 4 engine in the car last year ... and change tuner for the last engine !!!

anyway its to late to cry right now ... lets do something reliable and that gona kill it !!!

you wont like this but im going LS

[gtrjon]

lol damn i was hoping for a 2j

[RBZ32]

yea at least a 2j.. i could never go LS, love the sound of I6 and screaming open wastegates to much lol.
-Gerge