Terrh's R32 GTR Build

[NismoS-tune]

I can't understand how turbos which are twice as large as stock will spool as quick. -5s are much slower that oem and these things are 100hp bigger. That's like saying -10s would spool as quick as oem lol.

Nice work though, why didn't you go with something that required little to no modding like -10s?

[GTRADDICT]

I can't understand how turbos which are twice as large as stock will spool as quick. -5s are much slower that oem and these things are 100hp bigger. That's like saying -10s would spool as quick as oem lol.

Nice work though, why didn't you go with something that required little to no modding like -10s?

+1 don't make sense... Or meaby you're running a 2.8 stroker with monster cams !!!

[Terrh]

I'm from windsor, ontario.

Nowhere did I say they'd spool as fast as stock? Just nearly as fast.

My engine flows significantly more airflow than the stock engine does, porting helps with spool, these are dual ball bearing instead of 80's journal bearing tech, etc.

60mm -10's don't make anywhere near the power when compared to 71mm -15's.

[nelsonmxmarc]

Ballbearings create more friction than journal bearings, hindering spool rates slightly - maybe only 200 rpm max in some applications. But most turbo builders will opt for 360 degree thrust bearings or journal bearings as a way to decrease spool.
These will flow well with all the porting and the gasket matched/ported housing. I think that's like 1 point in CFMs which is like 40-50 CFM increase alone, not including head work

[trickey1991]

good luck with the 9 seconds.

[Terrh]

Got some more **** today!

Precision 880CC Injectors



Stainless Steel aftermarket/divided Dumps (you should see how **** the stock ones are)



ORC Triple plate racing clutch. Used but great condition, has about 1000KM's on it.

[jdms13rhd]

nice stuff. I still need to get some dumps like those ones.

[Terrh]

$125 on ebay.

[gtrjon]

lol i think those may of been my old turbo outlets and i ran percision 880s before they are great!! good **** man

[Speeddm]

9Seconds on Ebay components and stock driveline. This will be good to watch.

[jdms13rhd]

thanks, took note

[Terrh]

9Seconds on Ebay components and stock driveline. This will be good to watch.

if you're going to be ignorant stay out of my thread. Thanks.

[archaeic_bloke]

9Seconds on Ebay components and stock driveline. This will be good to watch.

LOL.... just wait, all the more reason it'll be so impressive when he makes it happen!

[leeaspin]

make sure you get solid video of this 9 second pass!

[Speeddm]

Sorry if it was taken negative. 9 s in a GTR is a very tall order. You can take it any way you want dont care. I was serious that this will be good to watch. I have watched lots of threads start with a 9 goal thats cool. For some reason it takes more then people think in a GTR. lots of dedication. Ive had my hands in several cars that range from 8-10 sec and for some reason the GTRs are the hardest to get there.