Any one have a crank pully washer? ...or

[kelaog]

Anyone have a crank pully washer (goes below the bolt against the damper) Or anyone know what will work in place? I had a brain fart and forgot to get one when I got the bolt. Let me know asap!!

Also would require super express shipping or if you live in vancouver, yay!

[RyanGTS-T]

Anyone have a crank pully washer (goes below the bolt against the damper) Or anyone know what will work in place? I had a brain fart and forgot to get one when I got the bolt. Let me know asap!!

Also would require super express shipping or if you live in vancouver, yay!

YOUR KIDDING ME!!!

[kelaog]

Anyone??

[mcfly]

I should have a half dozen used ones kicking around
i'll take a look but i have no guarantees that i can find them.

[kelaog]

Yeah let me know asap if that's okay. My car is supposed to go for tuning tomorrow and I'm lost without this thing.

Also if you're able to send next day I'd be willing to pay you good money for it lol.

[PH_Motorsports]

If D cant find one for you, let me know, and ill start searching through my pile..

[kelaog]

I'm good, no worries
Skyline shop came through! Now I found out the stock belts don't like the ATI damper, only the PS one fits. lol..

Alternator is too big, AC is much much too small =[

[RyanGTS-T]

I'm good, no worries
Skyline shop came through! Now I found out the stock belts don't like the ATI damper, only the PS one fits. lol..

Alternator is too big, AC is much much too small =[

So you mean the pulleys are too thin or your belts are too long/short? Try switching them around ofcourse?

[mcfly]

I'm good, no worries
Skyline shop came through! Now I found out the stock belts don't like the ATI damper, only the PS one fits. lol..

Alternator is too big, AC is much much too small =[

good thing, i couldnt find the bag.

For the belts take a thin tape measure and run it around. then go to napa and tell them you need a 4 rib x xxx mm belt

[kelaog]

good thing, i couldnt find the bag.

For the belts take a thin tape measure and run it around. then go to napa and tell them you need a 4 rib x xxx mm belt

Yeah I was planning on doing that or taking a piece of string and then lying it out against the measuring tape.

Thanks for the tip. The alternator belt was just a bit off so lordco was able to provide me a new belt on a guestimate... I just asked for one 2" shorter.

The power steering belt fits.

[nismo-152]

alternator is 850. ps pump 950.. not sure about air con i dont use it(sizes for ati damper)