Twin Turbo Replacements

[BlackAura]

check this thread. http://forums.gtrcanada.com/gt-r-tec...ge2-52183.html i wrote a little blurb about pulling turbos.

hope this helps.

Awesome, thanks! That's crazy....sounds like underneath would be a lot easier (less to remove), but there could be more in the way (coolant and oil lines are mentioned by someone in your thread).

Also, if I go from above, I'm thinking I can get a really good look at where the oil could be leaking from.

I have a feeling I might have to go from above and below though (as Rollie told me).

[4jo3]

you will have to do a combination of both above and below ... good luck

[EtienneGignac]

I finished pulling my back turbo today.

Got all the intake piping out, undid the hard lines, then heat shields. Undid the bolts from the manifold to the turbo to let it drop half an inch. Got the manifold bolts off and pulled everything from the top.

Some of the manifold bolts I had to reach from underneath. And yes it's possible to get the back turbbo out without touching the front one.

Putting the new one back in is gonna SUCK!

[BlackAura]

Looks like Rollie and I are going to check the leak out better this weekend, hopefully it's not the turbos, and just an oil line....we'll see though!