R32 GT-R Wiper Blade Size (Front & Rear)

[Asmar]

I was gonna change the wiper blades (front and rear) on my R32 GT-R with wiper blades made by PIAA but didn't know the size. Does anyone know? Thanks in advance for your help!

[Skym]

Measure the length, width of blade. I couldn't find replacements for window wipers on my R32 (width was a problem).

So from packaging, I used 20" / 500mm (says 500 at bottom of box) Bosch Twin brand x2 (blade + wiper body) on front for R32 that has multiple plastic adaptors for different cars, one of which fits a Skyline window wiper arm.

Bosch Twin looks like this -

http://www.powersparks.co.uk/images/bosch/truckwipers/N53.jpg

Sorry, can't remember size of rear wiper and can't find the packaging.

Bosch have a Aero Twin, which is designed for high speeds (motorway use, etc) -

http://www.boschautoparts.co.uk/pcWipe5.asp?c=2&d=1

[Asmar]

Measure the length, width of blade. I couldn't find replacements for window wipers on my R32 (width was a problem).

So from packaging, I used 20" / 500mm (says 500 at bottom of box) Bosch Twin brand x2 (blade + wiper body) on front for R32 that has multiple plastic adaptors for different cars, one of which fits a Skyline window wiper arm.

Bosch Twin looks like this -

http://www.powersparks.co.uk/images/bosch/truckwipers/N53.jpg

Sorry, can't remember size of rear wiper and can't find the packaging.

Bosch have a Aero Twin, which is designed for high speeds (motorway use, etc) -

http://www.boschautoparts.co.uk/pcWipe5.asp?c=2&d=1

Yeah... That's what I can't figure out... Some people say the front wipers at 20" and 20". Some say it's 20" and 19". Some even said 19" and 19". Tryng to see what's the right OEM size...

[markc32]

its 20" 19" and rear is 17.5" or a 17" to make it easier

[Asmar]

its 20" 19" and rear is 17.5" or a 17" to make it easier

TYVM!

[Asmar]

I used 20", 19" for the front and 18" for the rear which worked out really good.

[MR666]

Go to Crappy tire and get the refills for the OEM wipers. They have two widths and you need the narrow ones. Just tell the clerk it's for a 94' Nissan Altima. They are cheap too!

[jimbojones]

Old thread..but...

'94 Altima takes 21"/20" blades and are NOT the same part numbers as an R32 Skyline.