Tweet
I am wondering if it is possible to use the tomei lifters (buckets) with HKS Step 2 camshafts. I have a requirement for some very thick shims if using the stock lifter/buckets. Tks, Andrew
-
1970 240z, RB26DETT, Gt2860r-5's ,300zxtt 5spd,WCR Cv axles, ACT 6 puck clutch, LSD, 3" SS exhaust,porsche 996 brakes front, 944 turbo rears, coilovers, illuminas, meth injection, 444.9 RWHP @18psi
Best 1/4: 11.8@111mph -
There's no reason why it shouldn't if you fit the correct shims. It's actually a good idea to fit new lifters, new cams, as they can be bed in together for 20 min or so after they are fitted (before you drive car).
Break-in Procedure is here -
RESPONSE MONSTER
The most epic signature ever "epic".
-
lucas breakin additaveTrust T618Z,Carrillo Rods,CP Pistons,Tomei 280 10.8 lift ProCams, Tomei Spec C Springs, N1 Block, ARP, ATI, ATL, Bosch 044,Sard 800cc,PFC,Z32 etc.......Comment
Comment