Brake Ducting

[Marke]

Ok all you GTR racers, who is running brake ducting.

I want to know where you got your parts and how you put it together? What do I need to consider? If you have pictures that would be awesome.

[Skym]

This is the brake ducting on the rear of Gibson Group-A R32 GTR -

http://www.skylinesaustralia.com/forums/post-a195332-

There is a photo of front brake ducting on SAU forum somewhere, but it's similar to the rear brake ducting.

This is where you can buy the same brake ducting -

http://www.racerpartswholesale.com/product/Thermoid_Silicone_Air_Ducting/Thermoid_High_Temp_Ducting2

They have a custom mount made out of aluminium to hold front of brake ducts. You'll need to aim ducting at middle of rotor and make sure air is evenly distributed over whole of middle of rotor. Air exits on the edges of rotor.

Also you'll need to remove the stock stone shields behind rotors before fitting brake ducting. Could use stone shields as guides to making your own ducting out of aluminium to distribute the air evenly over whole rotor.

F1 racecars use similar ducting on rotor side, where ducting provides air to surface of rotor, not just the centre of rotor -

http://www.youtube.com/watch?v=hQaTSYNs_Kg

[nelsonmxmarc]

.... Insane..
Winter 2010 is looking interesting.

[frankiman]

i have a set of SPL brake cooling deflectors i'll be fitting on my car next month

[NismoS-tune]

I'm just using SARD ducting and guiding them into the brakes.