Announcement

Collapse
No announcement yet.

R32 Engine Wiring PICS Please

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • R32 Engine Wiring PICS Please

    I bought a car with the engine out and I am putting everything back together. Does anyone have a diagram of the engine harness or pics of the wiring with the engine outside of the car? I am asking because I am not sure exactly where the knock sensor bolts onto the block. Also I have a few wires I am not certain I plugged in correctly.

    Thank you.

  • #2
    The 2 knock sensors plugs are under the intake manifold, HUGE pita to get at + you have a metal clip to put in like the injectors but with hooks on the end...

    shoot up some pictures of the other clips you need help with and we can help you with those.

    For a diagram search "R32 GTR Manual" or "GTR Bible" ... also check the FAQ area here on GTRCanada
    Last edited by JNS Performance; 07-25-2010, 09:45 AM.
    2009 Mercedes C63 AMG. Daily
    1969 Cooper S. Restored
    1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

    Comment


    • #3
      I downloaded the GTR manual. Would you happen to know what page the diagram is? I got the engine as a bare block. The knock sensor is not even bolted on the block. I have the engine outside of the car at the moment. Ill try to take come pics on monday.

      Comment


      • #4
        This is Braden on Bens account

        Not exactly sure, don't have access to it currently... I believe it has a glossary but I am not completely sure. Just check in the engine related catagory.

        For the knock sensors they are located just below where you bolt the head on. Should be a round flat spot with a threaded hole you will find one near the front and one near the rear of the block, This is on the intake manifold side, not turbo side.

        Hope that helps!

        Cheers,

        Comment

        Working...
        X