Tweet
hey guys my r32 gtr is currently idling at 1200 rpm when cold and 1500 to 1700 when hot I already know there could be several causes to that so i'm not looking for possible reasons I'm bringing it to my mechanic to have it checked out my question is will that affect the horsepower, i tried a 0-100kmph test and i was just below 7 seconds mind you it feels alot faster, and i was starting and stopping the stopwatch myself , or maybe my speedo is screwed any thoughts on this would help thanks in advance
-
-
your idle wont effect your 0-100 or your hp1989 Gts-T Sold
1992 GT-R Sold
1991 Gts-T Sold
1989 Gts-T Sold
1992 GT-R What did i get myself into again... -
It won't but either you must have done something wrong. My 0-100 was 4.51 sec with a G-Teck with a virtually stock GTR. My idle is about 1400 too. Still trying to solve that issue.Comment
-
k thanks guys yeah i may be off a bit on the time as i was doing it myself and probably lost a second or 2 starting and stopping itComment
-
Don't forget that factory numbers for a stock gtr also mean when your car was brand new... I've see. Things that say 11.8 1/4... Any stock gtr doing that is bs1989 Gts-T Sold
1992 GT-R Sold
1991 Gts-T Sold
1989 Gts-T Sold
1992 GT-R What did i get myself into again...Comment
-
If anything, cars get faster as they age. As things get looser, friction gets less and less and the car wants to roll easier. As long as you are on top of the care and maint., cars only get better with age.
You may have an issue that not only is affecting the idle but costing you power (boost leak, MAF issues). You should have a pass. to do the stopwatch, consentrating on driving will also drop your 0-60.
Jon.Why don't you come over to MySpace and Twitter my Yahoo untill I Google all over your Facebook.
1990 GTR Drag Special T88H34D 11.24 @ 127.55mph at only 1.2bar...... officially. SOLD
Comment
-
yeah I'm going to get that checked out and clean my maf i also have a high pitch hum coming from the rear i brought a mechanic for a ride and he thinks it's a wheel bearing but they had no hoists available at the time also i gound a loose nut on the bottom of my aac valve at the bottom right above the oil filter not sure if air passes through thaqt part of it i'm going to start a thread on it anyway thanks guysOriginally posted by Dragon Humper View PostComment
Comment