Low rubbing issues?

[nimblestix]

Hey guys and gals, I dropped my tein hr's down today and was wondering if anyone has run into any serious problems with rubbing on the liners?
My fenders are good because my offset is still a little conservative but I am rubbing (outer side of tire) slightly on the rear of the fender liners when im just before full steering lock.

FYI I run 18x9 +40 offset with about a 5/8" spacer.

I don't imagine I'll be hitting full steering lock when driving around town, but if I wanna hit the track I imagine I'll have to raise her up a bit again.

Any of you peeps run into issues with this? Aside from issues at the track.

Cheers!

Sent from my Galaxy Nexus using Tapatalk 2

[Nismo_line]

I don't have a problem with turning but because im pretty low I rub my fender liners on dips and bumps. I just rub the outter side of them and im running 17x9 +20s

[Billy_Jack]

have the same problem haha, either going to raise it again or get western with the die grinder

[nimblestix]

have the same problem haha, either going to raise it again or get western with the die grinder

thats actually what I was thinking too. Just cut away some liner....

Sent from my Galaxy Nexus using Tapatalk 2

[89-GTR]

You can remove the liners completely, but I would not recomend if you drive it year round...