deleting abs ... need help

[goodine17]

Hi i have a 91 r32 gtr but the new top mount setup i got the abs pump is in the way of my waste gates . i wanna run no abs just wondering if anyone has removed there abs without any problem and if so how did u go about doing it. thanks Dan

[fwd suck]

i used a rhd 300zx mastercylinder because it has 3 ports on the side to conect all the pipes 2, and u also have to make a hard line and cut and re bend and flair the other 2 pipes

[goodine17]

hmm dont sound to difficult any chance u know of a walk through post anywhere

[fwd suck]

well its simple, when u take ur abs out there are 3 brake likes left, just plumb them in, the left and right front go to the front holes and the other is the rear on the master cylinder.
make sure u get a rhd 300zx mastercylinder. the holes r on the correct side and u need 3 of them.

[Skym]

Or fit brake master cylinder, hard lines from a Type-M R32 GTS-T without ABS (I think like they do on N1 R32 GTR).