LF: PFC Base Map for Rb26 Single turbo

[r32_nate]

Hey guys

Im about to do my single conversion and need a PFC basemap tp get me to the tuner. Anyone have something they dont mind sharing?

[collector240sx]

Hi Nate,

Might want to give some info about what injectors you have. Since depending on the size you'll have to scale the injector %.

If you still have the stock injector, you could also use them to drive to your tuner, then swap them out for the bigger ones.

Just be very careful not to go on boost if you have a bigger turbo, there should be more lag and should also spool later which in this case would be a good thing since you do not want to get on boost if the car is not tuned and there's a chance it would run lean.

Scaling injector on Power FC is fairly easy and if you can't find the formula just ask, If I'm not on, I'm sure some can provide it to you.

[r32_nate]

Its 750cc Denso Injectors, and its a 5hour drive to my tuner lol, so i need something that will be at least decent to get up to highway speeds and stuff without causing an accient lol.

[NoLimit0596]

light blue injector??? and maf???

[collector240sx]

Yeah forgot about the maf, if you when single turbo, what kind of maf are you using
If you have the 2 stock mafs Y to the turbo, you should be good, but have you moved to a single ?

For 750cc you would have to scale it to 59%.

It's .75ms for latency for bosch ev14 at 14v, since stock is .78ms this means you would have to put -.03 for the latency.

Hope this help you get it running.

[Dragon Humper]

Just reset the PFC, rescale the injectors and drive it nicely with the best fuel you can get and you should be fine. The RB26 base map is pretty safe compared to the other RBs and you should have no issues with knock below 5000rpm and less than .7bar of boost.



Jon.

[r32_nate]

kk. i am waiting on m pfc to get repaired. the hand controller screen was broken. ill let you know how it goes.I did get a geddy y pipe fo rthe dual maf. Also, im not sure n the brand of injectors, they are silver, but supposed to be 750cc

[r32_nate]

sorry maybe delphi 756cc

[r32_nate]

72lbs/hr or 756cc

Not 100% sure of the brand....someone suggested they are Delphi

Part number on them is 01D140B

[r32_nate]

so the map on the car is the old map tuned for anther car, and i have no idea what size inj and maf its using to scale it. does anytone have a stock rb26dett map with stock dual maf and 750cc injectors?

[NoLimit0596]

Hi do you have fc datalogit ?

[Black BNR32]

post number 6 bro. its right there.