Valve Shims

[JeffersonC]

Where is everyone getting valve shims? I could re-use a few of my stock ones but they don't look to be in the greatest shape. Just best to replace them all.
Sizes I need all very from 2.69, 2.71, 2.73, 2.89, 2.91, etc. I took a lot of time to get lash measurements as close as possible to cam specs.
Cheers

[R32moneypit]

Shims

Another member recently mentioned using Kawasaki motorbike shims on his build.

Member was Ztuned...you could try PM ing him

Where is everyone getting valve shims? I could re-use a few of my stock ones but they don't look to be in the greatest shape. Just best to replace them all.
Sizes I need all very from 2.69, 2.71, 2.73, 2.89, 2.91, etc. I took a lot of time to get lash measurements as close as possible to cam specs.
Cheers

[JeffersonC]

Found a good company that makes them in every .02 increments and the correct 12.30 mm diameter.

http://www.precisionshims.com.au