Cam Timing

[JeffersonC]

What's the baseline before final tuning? 260 cams, larger apexi turbos.

[Black BNR32]

Wat...

[nimblestix]

Time your engine to either 15 or 20btdc if your adjusting the cam timing via gears, do some research on the cams you have. Probably something like -2exhaust and +2intake is a good starting point.

sent from a galaxy far, far away

[Dragon Humper]

Just put them in straight up for now then get the motor run in propperly. You can play with them later as you shoot for big power. And for that, adjusting for max cranking pressure is a good place to be before you dyno tune.


Jon.

[Skym]

If skimmed deck of head or block you'll need to change camtiming. If are Poncams and haven't skimmed the head or block, can fit stock camgears for now, as are designed to work with stock camgears.