Anyone running 17x9 +12 on their stock R33GTS'?

[flipridah17]

Anyone running 17x9 +12 on their stock R33GTS fenders?

If you are can you please post up pictures on how it fits?

I have searched this forum under wheel fitment thread but no one seem to mention their offsets..

R33's GTS-T's only please. I know its fits flush on R33 GTR's

Thanks,
Mark Oliver

[jessem]

Youll be fine, maxgts had 9.5 +12 on his and it stuck out a fair bit

[flipridah17]

Youll be fine, maxgts had 9.5 +12 on his and it stuck out a fair bit

MAXGTST's setup is different offsets all around..

Fit my old wheels, Te37 18x9.5 +22 & +12

Thanks.. I'm looking for better fitment as of now I have

17x9.5 +15 fronts with 245/40/17
18x10.5 +16 rears with 255/30/18

Trying to change my goal to a more flush fitment (a little poking is ok, but nothing aggressive) Please bear in mind I do not mind rolling but trying to avoid pulling if needed..

[MaxGTST]

now that you know the offset I had, here some pic !

18x9.5 +14 ( had a 8mm spacer upfront ) 235/45/18... only a roll


18x9.5 +12 265/40/18... roll


I needed to change the rear tires to fit with a minor pull.

I might not read correct, but you have
17x9.5 +15 fronts with 245/40/17
18x10.5 +16 rears with 255/30/18

on the car right now ? That's a pretty aggressive setup, or you're planning on running these ? If so, you'll need smaller tires ( like 235/40 ) in the back since it'll poke 9mm more then my previous setup. Fronts will be pretty easy to fit, but I would put a 225/40. That's will give you the hellaflush look with a nice drop

[flipridah17]

Yes that's what I am running on the car right now..

Thanks to C_Unit for this baller approved setup..

How it looks right now.. (not lowered yet but it rubs sometimes on rears when I have passengers)

http://s174.photobucket.com/albums/w120/flipridah17/R33%20Wheel%20Fitment/

[MaxGTST]

you don't like that setup ? You want to change to 17x9 +12 cause your current setup is to aggressive and will need a pull in the back ?

[flipridah17]

I like it but looking for something less aggressive. On the plus side, I have someone local to me who's selling work wheels in that size for decent price.

[MaxGTST]

then you'll be just fine with those size, it'll poke by 6mm less in the rear and 4mm more in the front compared to my setup, you'll only need a roll and some stretched tires !

[M-type]

8x17 235/45zr17 front +35
9x17 255/40zr17 rears +38