Ebay Intake Manifolds?

[overboostedlebaron]

I still have the factory intake manifold and because I have installed a bigger turbo I DONT want my piping looking like this



so I was lloking at these 2.

http://www.ebay.ca/itm/SKYLINE-GT-S-GTS-R32-RB20DET-POLISH-INTAKE-MANIFOLD-RB-/270911061344?pt=Motors_Car_Truck_Parts_Accessories&hash=item3f138ebd60

and

http://www.ebay.ca/itm/nissan-rb20-rb25-rb26-intake-manifold-/280823876315?pt=Motors_Car_Truck_Parts_Accessories&hash=item4162684adb

any thoughts? this car is 90% street 10% track

** And another question is will my ps resivoir be ok that close to the turbo? Just noticed in this pic the person did not relocate his. Im just wondering if its worth it because i would rather not

[BrianV8]

Either of those will work fine. I have an godspeed manifold on my car works like a charm. And no powersteering is fine

[r33_gtst]

The second one looks better, it has the velocity stacks
You would need different injectors and fuel rail for that one

[amnash]

i would get this one http://www.ebay.ca/itm/SKYLINE-GT-S-...item3f138ebd60

keep the long runner so you dont loose low/mid range power

[Skym]

With intake manifold design you look at angle of throttle body (towards middle of plenum) and shape around 5th, 6th cylinders. Both contribute to close to even flow into all cylinders which is what you want. 2nd link is a perfect example of what it should look like.

Another option is to buy a turnflow intercooler -

http://image.nengun.com/catalogue/original/nengun-0077-00-arc-intercooler.jpg

Can buy turn flow intercoolers cheap and they work -

http://www.redlineperformance.co.nz/?action=products&part=27683

[overboostedlebaron]

awesome I think I will go with this one so i can use the factory fuel rail. next is deciding what size tb to go with

[Supraclean]

Get the 70mm

Sent from my BlackBerry 9700 using Tapatalk