90 GTS-t

[MaxGTST]

What's the offset on those meister ? Sick skyline, planning to do the same this winter, might as well do the wiring like yours, will be easier.

[wehtam05]

Wheels are F:18x9.5+10 and R:18x10+18. Fit the stock body with a roll and pull pretty damn nicely will get pics when the cars is back on the ground hopefully this weekend..!!

[Nissan_Sean]

I will be following this closely. Because I want a 1J in my gts.

*prepares for oakville flaming*


Sean

[jessem]

I will be following this closely. Because I want a 1J in my gts.

*prepares for oakville flaming*


Sean

I agree, if there was a quick write up on the basics for it i would probably tackle it tomorrow.

[Oakville]

I will be following this closely. Because I want a 1J in my gts.

*prepares for oakville flaming*


Sean

:0 Sean we've been over this a few times already...hahaha

go RB30

[wehtam05]

lol.. motor mounts, driveshaft, wiring...... done....

That easy.. haha no.

Finished up the wiring. Having troubles starting/running rough. So going to go through the coilpacks/make sure injectors aren't leaking/plugged. My coilpack harness is brittle as f*ck from being old and hot. So am going to have to replace the coilpack plugs.. Broke a few taking them off.

Hopefully the car is on the ground this week so I can get some shots with the wheels fitting all sick like..


Here's a few pics.

The goodlooking part!!


The not so goodlooking parts...

Relays and fuse board in the glovebox.


Switch panel(with tape for now) and kill switch. Still gotta put in the trim/shiftboot


Relocated battery with breakers instead of fuses.

[wehtam05]

Got it running today.. here's a quick little vid.

[YOUTUBE]<object width="480" height="385"><param name="movie" value="http://www.youtube.com/v/PlCk-E4_Ftw&hl=en_US&fs=1&"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/v/PlCk-E4_Ftw&hl=en_US&fs=1&" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>[/YOUTUBE]

[cschepp]

wow looks like its going to be alot of fun. Nice job on this car man!

[DreadedFist]

What is that material that you used for the switches in the center console? I like the look of that, and need to get rid of my big gaping hole where my radio and coin holder used to be :wink:

[BinDeal]

Don't forget to take pictures, of how you are going to run the exhaust system..

[wehtam05]

the switch panel is just made of plastic.... dont know what kind....

Here's the exhaust!!

[canadianjoker]

Cant wait to swing by PGP on saturday mat, this thing is going to be beast!!

[wehtam05]

Had an event at PGP yesterday.. Other than a few minor problems the shakedown went pretty good.. 2J runs awesome.. Didn't get to the dyno because it broke, so hopefully in the next week or so i can get on it. Here are a few pics from the event!!!

[Supraclean]

Car looks good man, I'm diggin the slide action.

[wehtam05]

Hey guys check out my feature on bigboymedia.net

http://bigboymedia.net/?p=900

Also car is now at 380whp