91 gts-t type M

[RyanGTS-T]

its actually the excat same i tried both .

Can you move the engine forward a bit?

[joecrack]

well i dont think so ..
the motor mounts are in place .
im thinking of just fabbing up a bracket from the mount to the body .

[joecrack]

Update!

well i finally got my compressor housing in .

clocked it accordingly and fit it .
this is how its going to look ( other than the fitting for the oil feed )
everything should be on by next week . hopefully


Enjoy

[BurlyR32]

Looking good Joe. Glad to see you got the turbo situation resolved. If you wanted my FMIC i could probably just ship it if you want. any idea how much it will cost to ship your setup to me? Im at L7S 1T1

[joecrack]

Looking good Joe. Glad to see you got the turbo situation resolved. If you wanted my FMIC i could probably just ship it if you want. any idea how much it will cost to ship your setup to me? Im at L7S 1T1

ill check on the shipping .
do you have yours off your car can you send me some more pics .
thanks

well i got the intake side of things on .

im going to eventualy move the wiring so its inderneath the rail and the injectors are pointing down .
clean it up a bit .
but for now i just want to get this thing started

[RyanGTS-T]

What type of paint did you use for your valve covers?

[joecrack]

What type of paint did you use for your valve covers?

this high temp engine enamel from duplicolor.
3 coats
then 3 coats of the clear high temp too .

[RyanGTS-T]

this high temp engine enamel from duplicolor.
3 coats
then 3 coats of the clear high temp too .

Awesome! I was looking into painting my valve covers but didn't know what would stick to them.

[joecrack]

just make sure you sand it down nicely

[joecrack]

Got the exhaust side of things all bolted up also .
relocating the power steering resevoir to where the wiper motor is .
got the fpr mounted also

enjoy

[gregrego]

Those motors look amazing with black valve covers, all my rb20's have had that done thus far. With my current skyline I'm going to try white :S.

What brand is the Intake plenum?
And with that fuel rail is it possible to keep stock injectors or can you use GTR injectors?

[joecrack]

Those motors look amazing with black valve covers, all my rb20's have had that done thus far. With my current skyline I'm going to try white :S.

What brand is the Intake plenum?
And with that fuel rail is it possible to keep stock injectors or can you use GTR injectors?

thanks i was oging to go white but i didnt find any high ttemp paint thatwas white . i think the only proper way to do it in white is to powder coat them .

the intake plenum is a jun style one from thailand . the quality is amazing i think .
and its a sard fuell rail so no more side feed and yes u can use gtr injectors but u need resistors

[gregrego]

Great, thanks 8)

I think you should truck that beast out to western canada to compete in d-sport, rev drift etc.

[joecrack]

Great, thanks 8)

I think you should truck that beast out to western canada to compete in d-sport, rev drift etc.

yea well thats the plan, hopefully, we'll see what happens .

[joecrack]

fired up for the first time .

no downpipe lol . so its a little loud and no maf . but i just wanted to start it its been toooo long . :drive:

enjoy !

CLICK HERE