Announcement

Collapse
No announcement yet.

The Candy Man

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • You could turn the boost down a bit couldn't you? It might help with the whole maxing out injectors thing until you pick up new injectors and a z32 maf.

    Comment


    • Im no expert with engines and stuff. i know a little bit

      but me turning my boost down wouldn't do much. No matter what the boost setting, my injectors max out at 5800 rpm. turning the boost down would only make it so it would take longer for me to reach that point.


      Now yes. if i turned the boost down a lot, like to 5 psi or something. i could see me being able to go into a high rpm range.


      But i still don't really no how to work the boost gauge, but i would assume that if i fiddled with the duty cycle and spring pressure, i could find something that works for my current setup until i get injectors.

      but with this all being said, i hardly ever go that high. If i do a "pull" on the highway, i usually shift at 5000 or less
      sigpic


      Originally posted by m_melen
      ...it woulda been safer if his harness were made of jello

      Comment


      • So new injectors should be here soon. Its actually a gift from a buddy so i don't know the brand or size but i think they are around an 800cc.


        Im hoping i can have them in before winter and then get a tune before winter. But only time and weather will tell
        sigpic


        Originally posted by m_melen
        ...it woulda been safer if his harness were made of jello

        Comment






        • lowered it and removed wings.

          I lowered it an inch all around.

          I rub in the front so ill be carefully rolling the fronts and probably rears tomorrow
          sigpic


          Originally posted by m_melen
          ...it woulda been safer if his harness were made of jello

          Comment


          • Big improvement in my opinion looks alot better, good job
            Miss driving sooooo bad! Need to get a car on the road ASAP!

            Comment


            • i think so too.


              so I have a somewhat outline for the winter.

              nothing to crazy. Number 1 on my list tho is a proper tune. I strongly believe that a proper tune makes or breaks a car.

              in order for me to get a proper tune i need to get a z32 maf and bigger injectors

              I would really like some new wheels but i don't know if ill have enough cash flow to support it as well as get parts for my 240sx

              the last thing the car needs is a new diff. A stock one is fine for now if i can find one for cheap. I just need one that isn't worn out so i can actually get grip


              so a general list will be

              500cc or bigger injectors
              255lph walbro fuel pump
              Fuel pressure regulator
              Z32 Maf
              TUNE,TUNE,TUNE


              if i can afford it

              Wheels (if i can't fund new wheels, ill space current ones out)
              get hood painted all blue
              Get new (different) hood pins


              pretty much all my money i make will be going towards my 240sx, my skyline, and my 4runner. mostly skyline and 240 tho
              sigpic


              Originally posted by m_melen
              ...it woulda been safer if his harness were made of jello

              Comment


              • looks good dude! I had mine just as low as that, and hellz yeah it looks reallly nice. But I quickly realized that all of lethbridge's road construction workers were drunk while working. Seriously I think I caught air going over whoop up yesterday. has it been pretty rough with it that low?

                Comment


                • I have a GTR helical LSD. let me know if you are interested..
                  Biggest selection of Skyline CarbonFiber & FRP Aero in Canada. PM me.

                  Comment


                  • looking good.
                    RB25 Powered RWD GT-R

                    Owner for Turtle Garage Hicas Delete Systems

                    Comment


                    • Actually its not that bad. I was rubbing really hard so i rolled the front fenders, but then i also tightened up the springs so i reduced the rebound and that raised the front up a bit, and it still looks good and no rubbing. Prior to that i was scraping all over town.
                      sigpic


                      Originally posted by m_melen
                      ...it woulda been safer if his harness were made of jello

                      Comment


                      • hey i got some sparco hood pins i dont need
                        Check out Top Tier Imports. Sign up today! http://www.toptierimports.com
                        http://www.youtube.com/user/TopTierImports?feature=mhee

                        Comment


                        • Wheels got spaced out yesterday, which meant fenders had to be rolled. DONE AND DONE


                          Rear is Flush, and front has a little bit of poke





                          Last edited by RHDskyline; 02-14-2011, 04:22 AM.
                          sigpic


                          Originally posted by m_melen
                          ...it woulda been safer if his harness were made of jello

                          Comment


                          • I have a stock LSD from a GTS-T, plug and play.
                            I also have a lot of other little things lying around to, depends what else you have on your wish list.

                            Comment


                            • Hey. Wanna send me a text about parts
                              sigpic


                              Originally posted by m_melen
                              ...it woulda been safer if his harness were made of jello

                              Comment


                              • get the pins yet?
                                Check out Top Tier Imports. Sign up today! http://www.toptierimports.com
                                http://www.youtube.com/user/TopTierImports?feature=mhee

                                Comment

                                Working...
                                X