Neo6 powered GTST

[LettoGTST]

Hey well its about time I start my project thread.

Neo6 powered GTS-t
1990 Nissan Skyline GTS-t
126,xxx KM on the car

Mod's:
98+ R34 RB25 Neo engine/transmissoin (40-60,000km)
FMIC
Nismo rear A-arms, Transverse links
Cusco Tension rods
APEX Coilovers (not Apexi)
3.5" Cat back
17x7, 17x8 Volk CV-Pro rims(Being replaced with 18x8 18x9 Volk VR-X)
HKS pod filter
HKS SSQV BOV
Nismo GMAX Twin Plate
1 Piece Driveshaft

Furture Mods:
700cc injectors (Nismo or Sard)
Twin plate clutch ( Bought)
Garrett GT3076r
Topmount manifold
Cusco RUCA, FUCA, all links
1.5/2way diff (Prob Cusco)
Swaybars
Eventually engine internals


Heres my car mostly stock.



The RB25 Neo6


Pulling the old RB20






Cleaned up a bit.


Getting the Neo ready to drop in.



In goes the neo


Pic of my coilover( I have more pics of them just not on this computer)


I will update with more pics of the car as soon as I upload them.

[Supraclean]

Looking good Letto! As I still have your engine puller, ill store it for you till my engine goes back in.

[RWD_GTR]

plans for car? drift? daily and drift? fast daily?

[LettoGTST]

Yea, im building it to drift and its my daily driver during the spring/summertime

[cschepp]

Not bad at all man. Would have loved to do a r34 motor and trans instead of the 33. Oh well maybe next engine I will. Anyways what are your power goals out of it?

[LettoGTST]

Im hoping to hit 400-500rwhp when it all done. Im leaving the engine stock untill I can affored to rebuild it, So for now im hoping to hit over 300rwhp with a stock engine after a good tune.

[LettoGTST]

UPDATE:
From the ashes it rise's, The Skyline is alive. Still needs some work it run's a little rough, need to make a new throttle cable bracket, and some new gasket for the power steering pump. I think I have some boost leaks also.

[cschepp]

Whydo you need to make a new bracket. Should have to with that engine. Let me know what you mean

[LettoGTST]

When I bought the engine it had shipping damages from the cable they use and bent a couple things on the engine including the throttle cable bracket

[LettoGTST]

Well im having some weird issue's atm, when I start my car it has trouble staying at idle, when I give it some gas it take's off to 3-4000rpm all by it self and it dosent drop back down. Dose anyone have any thoughts on why it is doing this? and it seems like it is over fueling.

[nelsonmxmarc]

TPS adjustment?

[LettoGTST]

Yea i was playing around with the adjustment of the TPS, I even unplugged it to see if it would affect it at all but it didint. I have ripped the throttle body of to give it a good cleaning same with the MAF. Is there anything else that could affect it?

[Supraclean]

Letto I demand an update!

[LettoGTST]

UPDATE:

Well I think its about time I did another update, I have gotten my Idle to smooth out a bit, it still try's to stall on me sometimes. I will be pulling the engine again soon, so I can install my Nismo twin plate clutch as soon as it gets here. I am also looking to get a 1 piece driveshaft made up but I cant really find to many place's to make me one for less the $900 which I think is too much for one. If anyone has any place that they have gotten one made up for a decent price let me know.

[LettoGTST]

Update:

Well another update, I went an pulled my engine again to replace my clutch for a Nismo GMAX twin plate, Cleaned my engine bay and painted it as well, I got my driveshaft ready to install. When I get back from camp tonight or tomorrow I will be putting the engine back in my car fix a couple boost leaks that I think is the cause of my idle issue and a fitting for my boost controller. Im currenty looking into buying some new/used rims for my car Ii have a limited fund for them but I think I found the ones im going to buy just awaiting a response from the sell to see if he will ship them to me! I might have a orgin front bumper comming as well with a trust downpipe, Im checking to see how much it will cost me to get my resonater remove along with the cat! Till the next update heres a few pics in the mean time!







Will I just recieved word that I won the auction for the rims I was looking at i got them for $1090 shipped to my door, Needs some TLC but I will be getting the centers powder coated bronze I think or if anyone have any opinions on what color I should get let me know!