Brock's GTSt Build Page

[Boot]

Ya actually! But im not sure if the car is still in Lethbridge. It was a black r33 and he was going to the UofL. We chatted in the parking lot at school. It was pretty stock tho. No aftermarket wheels or performance upgrades.
To be honest I dont think I have ever seen your car around! Looks good though!

[RHDskyline]

Umm. WTF. I didn't know people from lethbridge were on here. Anyone wants to meet up, or needs a hand with anything. Just wants to talk. whatever

shoot me a text. 403-315-0340. Always willing to help, lend some knowledge or just talk cars.


The black r33 is still in riverstone, and thats the only r33 ive seen in lethbridge.

[RWD_GTR]

Lethbridge skyline meet this summer? im down.

i havent seen this car around either. looks good tho. ill prob see you around soon. ill be in the black gtr full kit with huge wheels.

[94typem]

Well i just got mine from calgary a couple weeks ago so it hasnt been out to much yet and im definitly down for a lethy skyline meet.

[Boot]

RWD_GTR just checked out your build page, HOLY DISH!!! Looks really agressive. Love it

What exactly did you guys mean by 'snowboard things' for plugging the holes on the boot lid? I think someone had a different spoiler mounted on my car at one point and they drilled an extra hole on each side. Thats why that rust spot happend. If you look closely right by the rust the white spot is actually another hole filled in with calking/silicone stuff. Im not sure if I should just take a grinder to it or what.

[Nissan_Sean]

Nice car,

You could fiberglass the holes. Should hold for a long time if you do it properly. I found the same rust when I took the gtr wing off, maybe a little worse too.

Also, rb20/25 fittings are the same. Water and oil. I've yet to see one that didn't bolt right on.

+1 lethbridge meet, but you guys should drive up when we have our first Calgary get-together.

[RHDskyline]

if we had a lethbridge and calgary meet. and EVERYONE came out. Could you imagine how many skylines there would be

[RWD_GTR]

if we had a lethbridge and calgary meet. and EVERYONE came out. Could you imagine how many skylines there would be

this^

they are called snowboard stomp pads.
if you look at my build you might see mine. they are just silver things with 3m on the bottom.

[Boot]

Also, rb20/25 fittings are the same. Water and oil. I've yet to see one that didn't bolt right on.

+1 lethbridge meet, but you guys should drive up when we have our first Calgary get-together.

Really? Because the coolant benjo bolts from my stock hard lines were much to small for the rb25 turbo. Doesnt matter now tho, I took out the hard lines and ran braided line and -6 aluminum fittings anyhow.
Ive had no luck finding a 10mm metric stud for the turbo manifold so I think i am just going to use a bolt instead. Hopefully my turbo will be back in this weekend. Just gotta prep and paint my gtr bumper, stock mirrors, and tail-light bezels and she'l be ready to hit the street.

Stomp pads eh? Maybe ill go take a look at Boarderline or Alpinland here in town. I still might take a wire wheel or grinder to the rust so it doesnt spread more.

And count me in for any kind of meet. A Calgary get together would be awesome but Street Machine weekend would be a good time down in Lethbridge also.

[RHDskyline]

i just looked at the first picture you posted and i was like. I know that place. haha

My buddy and i used to skate at that church

[94typem]

Street Machine weekend would be a good time down in Lethbridge also.

Ya if there were a bunch of skylines down here for the cruise night on street machine weekend that would be sweet sh*t.

[RWD_GTR]

Ya if there were a bunch of skylines down here for the cruise night on street machine weekend that would be sweet sh*t.

yes!!! we will have to figure out where to meet up for cruise night. or just all go down 3rd together. i think its $10 bucks.

builds sounds like its going along good. need more pics

[94typem]

Yes more pics are needed!!! Keep it up man looks like its gunna be sick when its done. BTW Sorry for the thread jacking with the talking about meets and sh*t. Ill put somethin up in the right area to continue this discussion

[Boot]

Thanks guys! No worries about thread jacking but ya, not a bad idea to start a meet thread at some point.

Sorry for the lack of pics/updates. Things have been busy with school lately. But the plan is to make some progress on getting the turbo back in tonight. Ive also been sanding my bumper in my spare time.

The mirrors are next.

As you can see in the pics, the paint is chipping quite badly and my tail light bezels are even worse.

I also need to find a manual boost gauge so I can get my sketchy DIY MBC installed...

Still need to find a way to plug the hole i drilled and tapped in my IC piping for the rb25 wastegate/turbo fiasco.

More to come in the next few days/weeks...

[Skym]

I see. Weld a 1/8 thread steel boss fitting over the top of hole and plug the hole on boss fitting with a 1/8 thread screw in cap.