Brock's GTSt Build Page

[Boot]

I see. Weld a 1/8 thread steel boss fitting over the top of hole and plug the hole on boss fitting with a 1/8 thread screw in cap.

Ya i think the plan is to find a plug for the nipple I already threaded on there. Shouldnt be very difficult to find at a hardware/auto parts store.


Turbo is now on! Feels great getting the car back on the ground and off the jacks. Had to use a metric bolt since I couldnt find any metric studs that were the right size. Slowly but surely the car is almost street worthy

Just have to paint the bumper and mirrors and install the boost controller.

Here is how the car sits currently



Hopefully I can get all my exterior pieces to the body shop by next weekend and have the car back on the road the following weekend

[RWD_GTR]

looking great. im digging everything but that mbc haha

[Boot]

Cars back on the road! Its not much but I think its got a bit more jam after installing the FMIC. Or maybe it just feels faster after driving my slow ass 4runner all winter! haha Only issue is it backfires like a beast when I shift up between 1-2 and 2-3! haha We'l see what it does once I get some fresh premium in the tank.

Finished sanding the mirrors and front bumper so the plan is to remove the tail lights tonight so I can get everything painted by the end of the week. Unfortunately that means it will be parked until paint is done. However that should give me some time to install my sketchy MBC and a boost gauge (which I still need to buy).

I'll try get more pics up once I get some time

[RWD_GTR]

hopefully see ya around. im getting insurance tomorrow.

[RHDskyline]

i don't matter anymore because i'm skyline-less haha

[Boot]

Update!

Got the tail lights out and the bezels removed! Its kind of a pita job because of the black gunky sealant Nissan used to seal in the lights. I found this thread somewhat useful when it came to removing the lights. http://www.skylinesaustralia.com/for...y-tail-lights/
Anyhow, pics...

[Boot]

I also spent some time mocking up my GTR bumper before paint. Threw the lip on with some zip-ties for reference. My major issue was trying to center the IC core with the hole in the bumper. Ended up needed to re-cut larger holes in my wheel well for the IC piping but I think it will look pretty good when its done!!

Note that my hood lip is still not sitting perfect. The 3M double sided tape keeps pulling up on one side so its a little funny looking right now. Im thinking of using something more permanent soon

Centered IC...


I also forgot to mention earlier in the thread that I painted my valve covers this winter. Wrinkle black.


Thats it for now! Just have to sit around waiting for paint now. I will post more pics when its all done and washed up

[RHDskyline]

i wanna see the car ripping around town

[RWD_GTR]

how did you do the wrinkle paint? and where you buy?

where abouts do you live in lethbridge? wouldnt mind checking it out sometime.

[Boot]

RWD I just took the covers and the coil pack plate off, gave them a very light sanding and washed them with soap. Used VHT wrinkle black paint made specifically for valve covers. I picked it up at CEP Auto. Think it was like 15 bucks for a can (you only need one). To get the wrinkle effect you just apply three coats of the paint then heat it. I used a blow torch and stood a good distance away from the covers to heat them evenly but ideally you should use an oven. Problem is you need to use an old oven because the paint will ruin it for cooking food in. Unless you like the taste of chemicals...

[mitch09]

man looking good, in that one picture i seem to be moving really fast but it seems my car is still on jacks... stoked you got the IC centered looks alot better. we need to make some clips for those lips soon id rather not having mine taking flight on me again. about the meet Street Machine sounds sick we could do my place and then go out early and take over a parking lot on mayer.

[RWD_GTR]

man looking good, in that one picture i seem to be moving really fast but it seems my car is still on jacks... stoked you got the IC centered looks alot better. we need to make some clips for those lips soon id rather not having mine taking flight on me again. about the meet Street Machine sounds sick we could do my place and then go out early and take over a parking lot on mayer.

my cousin tried that. not a good idea on mayer.

didnt realize that was your car in the background.
got a bigger turbo this year? ya gonna do autocross again?

sorry for thread jack.

[94typem]

ya takin over parking lots on mayer is a really bad decision the cops have been called on me an some buddies a couple times this year already.

[RHDskyline]

Dont go on Mayer then. Come to Mr. Lube.


Btw. I got that teal JZX81 Cresta rolling around. No more blue skyline for me

[mitch09]

not a good idea? come on gentleman this is not our first rodeo. as long as we pick a public one like hendo and people are chill there wont be any problems. ya il be at the autoX again, i also want to do a few other ones. as for my car there are a few things up my sleeve il make a build thread in the next week or so. RHDskyline what happened to your car? i saw you driving a few weeks back. as for my car in the back i traded it for the big rig to the left of it.