Announcement

Collapse
No announcement yet.

SKYLINE build in the 204

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • TylerMac05
    replied
    This is super clean very nice

    Leave a comment:


  • Nismo_line
    replied
    couple pics. better ones to come



    Leave a comment:


  • Nismo_line
    replied
    Well this past week has been interesting. On Monday my brakes quit on me because the lines rubbed the tires. So I phone Nissan to get a line. Well there is only one in Canada and its 130 for a freaking rubber hose. COME ON. Instead I ordered up some russell braided stainless lines for 99 for all 4 hoses.


    Next up I rolled my fenders and lowered the car. That went well till the last coil over in the back. I could turn the collar little bit but then it would just get super tight. Now what. I grabbed a spring compressor and took the coil over apart. So much **** in the collar that it wouldn't turn. Finally fixed that and slammed the car. Looks so good and pics to follow.

    Leave a comment:


  • Nismo_line
    replied
    Today i got the z33 brakes mounted up. The bracket i purchased isnt needed and the brakes bolt straight up. All that is needed is to drill out the caliper mounting holes.

    Leave a comment:


  • Nismo_line
    replied
    it will be daily driven but not yet. still need to do the z33 brakes and put my wheels on. Then gonna go lower and roll the front fenders.

    Leave a comment:


  • Messiahlee
    replied
    very nice.
    are you daily driving it now?

    Leave a comment:


  • Nismo_line
    replied
    well well what do we have here


    Leave a comment:


  • Nismo_line
    replied
    update!

    Some polishing of the lips before the rims went back together. took about 4 hours in total for the polishing.
    Before:



    After:



    Very happy with the way they turned out.

    Next up i put them back together. Since i did this last summer when i had them powder coated, i only had to seal the lips to the compression rings instead of both sides. Saved me some time but still a pain in the ass.




    mmmmmmmm. lol

    Heres a little surprise you'll have to wait till see.




    Some other parts that i have acquired are vvme hids 6000k, z33 big brake setup, new falken fk452 215/45/17 tires.

    Also some billet aluminum brakes for the brake kit.



    In the next couple weeks lots of progress will be made and more pictures to come.

    Leave a comment:


  • Nismo_line
    replied

    they look kinda pink with the flash. in person/sunlight they are very purple

    Leave a comment:


  • Messiahlee
    replied
    car looks nice man

    Leave a comment:


  • Nismo_line
    replied
    well its been a long time since the last update. As of right now the 18s are sold and all 4 rims have gone to get powdercoated. They will still be purple but more like the hks purple. I am upgrading to z33 so i wont need spacers anymore. Then going lower. Also plan on doing hicas lock bar aswell.

    Leave a comment:


  • Nismo_line
    replied
    couple more shots.



    Leave a comment:


  • Nismo_line
    replied
    fronts- 17x9 with low offset.
    rears- 18x10 with low offset.

    dont know the offsets but i know that the fronts with the spacers im using, puts them into the negatives

    Leave a comment:


  • DreadedFist
    replied
    Wheel specs?

    Leave a comment:


  • Nismo_line
    replied
    check this thread for photos!
    http://forums.gtrcanada.com/media/50...tml#post483844

    Leave a comment:

Working...
X