Announcement

Collapse
No announcement yet.

Nissan R334 project --- updated: 10 avril 2011

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • #31
    Cool good luck with your project.... I'm happy with my uras fenders... Got them beefed out way wider than r34 gtr and personally I'd rather play with glass.

    I got then for less than 400 too...

    Sent from my MB860 using Tapatalk
    -= ECU UPGRADES =- -= LOCKOUT BARS =- -= AERO =- -= SEATS =- -= ACCESSORIES =-

    -= PM ME FOR INFO =-

    Comment


    • #32
      So you have gtr rears?

      Sent from my MB860 using Tapatalk
      -= ECU UPGRADES =- -= LOCKOUT BARS =- -= AERO =- -= SEATS =- -= ACCESSORIES =-

      -= PM ME FOR INFO =-

      Comment


      • #33
        like i said: its my first nissan, but not my first conversion !!

        RESULT: full complete R34 GTR nose (a/c rad, intercooler, oem 3.25'' pipes, elec fan, bumper support, rad support, wires)

        All wires are funtionnal except the A/C for now:



        Last edited by BLITZEN; 10-05-2011, 04:50 PM.

        Comment


        • #34
          updates coming !
          Last edited by BLITZEN; 10-05-2011, 04:50 PM.

          Comment


          • #35
            I know on R32s there is a sensor for your climate control that tells you the outside temp.
            Traction is optional, so are zipties

            92 Gtst/Silver bullet

            Comment


            • #36
              mm..du no, it seems like (the sensor) its IN the FMIC !!

              Comment


              • #37
                are you gonna get a side intake plenum to work best with the piping?
                RB25 Powered RWD GT-R

                Owner for Turtle Garage Hicas Delete Systems

                Comment


                • #38
                  Originally posted by RWD_GTR View Post
                  are you gonna get a side intake plenum to work best with the piping?
                  I 'll like, but my setup (driver side) its for rb26 (future plan), so for now am gonna pass the right pipe over the clutch fan...

                  Comment


                  • #39
                    If the intercooler came of a R34 GTR (which it did), that sensor would be for the MFD (multi function display) to read intercooler temps. Unless its somewhere else but Im sure thats it.


                    Build is going great so far. Get some more pics mate!
                    Last edited by bellis_GTR; 04-28-2011, 11:26 PM.
                    Heart rate 160, I'm goin 260, RB26 run me past you in a jiffy

                    GT-R

                    O O SKYLINE O O

                    Comment


                    • #40
                      Love POR15, I have a can in my fridge right now! its the best paint i've ever worked with.

                      bellis_GTR is right, that plug is for the R34 MFD temp sensor....


                      So, ... you're in Quebec, where they ban new import of RHD's... so it seems like you have a plan here, no? my guess is you want an R34 and this is your way of getting around the law... buy an R33 GTST chassis (plated and legal in qc) and buy all the stuff from R34 one piece at a time.... you have the full nose swap, then u said ur getting R33 GTR front fenders, then cut and weld in some R34 rear fenders? will you change to the R34 trunk and tail lights and bumper? ... you already said you plan on doing RB26 engine, will you swap rear subframe with R34 and make it work AWD?

                      Please tell us your plan, I'm really iterested, and btw, the nose swap is perfect... nicely done!
                      Last edited by archaeic_bloke; 04-28-2011, 11:39 PM.
                      The SkyLife Community & News Website --> http://www.skylife4ever.com

                      Comment


                      • #41
                        Originally posted by bellis_GTR View Post
                        If the intercooler came of a R34 GTR (which it did), that sensor would be for the MFD (multi function display) to read intercooler temps.
                        esattamente !!

                        its for the intercooler temps, am gonna use it, with an GTR indicator in dash mount (3 pods meters)

                        thx for comments, dont forget its a part-time job, and i take my time to do lots of research and i want to do a very good job to keep value of the car . I always take care of my toys

                        Comment


                        • #42
                          @ archaeic_bloke

                          yep am in montreal (quebec) and yes they banned RHD importation here in 2009), BUT my car was imported in 2008, so its an ..diritto acquisito (acquired right.. i think in english).

                          The plan its to convert only the front R34 GTR to my R33 GTST, I would like to do on GTR, but we dont have GTR R33 in quebec, cause they started year production in 1995, and the last RHD could import in 2009 it was an 1994 .....so sad

                          For real , i wish to have an R34 ! but for now I'll content just have the front only . I saw on other country, who they made the conversion, and i really liked the line of the car with the R34 front clip.

                          The rb26 engine its an future plan, thats why i decide to do holes exactly where it is on R34 GTR. but for now am happy with my rb25 (anyway it came with new R34 neo turbo and i have HKS cams inlet i like the pull the car done !!

                          I dont want to do the rear, i like my rear R33 with the GTR wing and bumpers lips se my avatar its my old r33 front, now gone !

                          So thats the plan
                          Last edited by BLITZEN; 04-29-2011, 12:04 AM.

                          Comment


                          • #43
                            Very cool man, I think its an ambitious plan and that you will be able to achieve your goal, I agree the best looking R34 conversion is for sure from the R33.

                            Are you driving the car yet? when will you come to some meets in montreal?
                            The SkyLife Community & News Website --> http://www.skylife4ever.com

                            Comment


                            • #44
                              thx

                              no its my second car,
                              the car will be ready end of June (I'm on a waiting list for the paint shop!!)

                              I'll let you know for the meet......WHERE exactly you made ​​your Meet in montreal ?

                              Comment


                              • #45
                                they happen everyweek! sometimes a orange julep, sometimes in laval, etc check Montreal Racing in the meets section, its always posted there
                                The SkyLife Community & News Website --> http://www.skylife4ever.com

                                Comment

                                Working...
                                X