Blitz BOV on Rb20

[specialedition]

Hey guys,

So my car came with a blitz bov but the vacuum hose wasnt hooked up.
Now i wanna hook it up because my stock one is fluttering at the moment and i dont like that fact that its slowly killing my turbo.

here is a generic picture of mine


Now to install it, all i have to do is remove the vacuum hose from the oem bov and re route it to the blitz one right? Then adjust the pressure settings with an allen key?

EDIT: The Bov is attached to the cold pipe going down towards the SMIC and not the oem position. If it makes a difference

Any input would be great.

Thanks

[specialedition]

Ok so i was doing some research and found out that i need to block off the return pipe and the bov. Im just gonna clamp a coke bottle top on the return pipe. For the oem BOV do i need to remove it and block it if so how?

[specialedition]

Ok so i figured it out on my own and it sounds like a champ.