What do You guys Think?

[actionbstard]

let us know how the ku plenum and tb work out for you.
I have been interested in seeing someones results.

I don't know if it will work if you don't have a port and polish job and some goodies.But mines has no problems at all.Of course this is a fully built rb that revs up to 9k 10k easy.Thats when you really know when stuff really work.lol.
The economy is not that good This built motor is nothing special.Nothing that hasn't been already tested or done.Nothing.

Thanks guys

[Skym]

Yeah, 700hp (at engine) was in tuning software, but sometimes that can be a guess. 700whp probably would need something better like a "upgraded PMAS HPX slot style MAF" that spank110 has already mentioned.

You can run MAP on HCR32 with stock BNR32 ECU. Replace MAF with MAP sensor (Tomei Reytec ECU is a modified stock ECU with MAP sensor, so maybe Reytec MAP sensor would work??) + use stock intake airtemp sensor and join o2 sensors together so they get the same voltage. But with HCR32 ECU, doesn't have a airtemp sensor.

HKS sold a device (HKS VPC) that has a MAP and airtemp sensor which gets translated into voltage by a box looking device. This can be adapted to work on PowerFC or Nistune ECU. But it's a discontinued product, so only available secondhand.

HKS VPC (Vein Pressure Convertor) -

http://www.hksusa.com/products/?id=858

[RyanGTS-T]

What car is this motor in? And what throttle cable are you using?

I am have been in need of a longer throttle cable for my car since my plenum install. I really don't trust the two piece throttle cable I have right now, it's already fallen apart twice. I've tighten it up since but it still feel like there is slack in it even though if I adjust it a little more then my throttle body will open up.

[actionbstard]

get one from a 240sx 89+ tb cable

Now I want to make this work before I get my hks v pro.
Theres alot of guys out there in need of a maf that can handle good hp.

To make it work with the pfc l jetro is all I want to focus right now.I have a good tuner next to me for the HKS

Now has anyone use this set up?
PFC L-jetro-FC data logic
Ford Racing lightning Maf 90mm

[Skym]

As far as I know you need the MAF table data (voltage vs load) to make the MAF work. I would presume Eric has this data, if he's done it before???

[actionbstard]

you can get that with the fc datalogic.Thats what he told me.I just got a plug for the ford maf.I have aQ45 maf plug on my maf harness now so I'll be changing it for the mustang one