Is there away to fit on These JDM rims on R32 GTST Type M?!

[ozalkl]

Hi guys,

I have a set of Work Emotion Cr-Kai's, i used to have them on my 08 Civic, they are as follow:

5 x 114.3
17 x 7
+42 offset

I know such a question has been asked before, but Will this rim fit on my GTST type M? I am wondering if there is any way i can add in a spacer etc to have her fit? as the color perfect matches the car and its light weight, beside I already own them.

I need to know shall i Sell them or there is a possibility of mounting them on my GTST?

Here is a shot of the rims:

[TheyKilledKenny]

They probably wont fit over the front calipers. You would be better off with a lower offset like a +30 to +20 assuming you have stock brake calipers.

[nelsonmxmarc]

Ya that offset is sunken hard. Going to need something like 10 mil spacers, minimum. 20 mil would look good, but like Ken said, brake clearance may be off depending on the rim contours..

[frankiman]

just go out and buy 25mm bolt-on hubcentric spacers you'll be fine, it'll give you a final offset of +17
the rims and pretty narrow and will have no issu fitting

sponsors on this forum can help you source the right model spacers

personnaly, i used 25mm Ichiba spacers on my 17x9 +38 work cr kai rims to get them down to +13

[nelsonmxmarc]

Ya but these are x7! haha it's gonna be whack fitment but yea, 25 mil is going to be a LOT better..

[Stuntmonkey]

Buy new wheels. Seriously. 7s SUCK and will look so silly. Get a 9.5 + 12 or such.

[DreadedFist]

Buy new wheels. Seriously. 7s SUCK and will look so silly. Get a 9.5 + 12 or such.

Not everyone wants wheels that don't fit. 17x8 to 17x9 with offset around +30 to +33 will look good.

[doc]

just get some wheel adapters ... and your set ... like they said 20 - 25 mm spacer would work

[ozalkl]

thanks guys, i will source for the 25mm bolt-on hubcentric spacer and give her a shot, if it didn't look good or performance wise i will post her for sell and get a different set of rims, thanks to everyone for their input

[MaxGTST]

You have a skyline, a turbo inline 6 engine... and you'll put the same wheels that were on your civic. You're doing it wrong.

[S13Jordie]

You have a skyline, a turbo inline 6 engine... and you'll put the same wheels that were on your civic. You're doing it wrong.

quoted for truth

[TheyKilledKenny]

VTEC = Virtually Torqueless Economy Car

[ozalkl]

dont shoot the civic lol i use it to commute in winter, I've made a decision im going for spacers if it didn't look good then i will shop for a new set of rims

[GTR-guy]

25mm bolt on wheel spacers are expensive! I'd say just sell those wheels and buy a better set for the Skyline!

[Stuntmonkey]

thanks guys, i will source for the 25mm bolt-on hubcentric spacer and give her a shot, if it didn't look good or performance wise i will post her for sell and get a different set of rims, thanks to everyone for their input

You're wasting your money mate!