Air flow meter identifcation

[DatsunZ31]

I bought a rb25 air flow meter, I forget what series. The air flow meter is stamped "E60", will this air flow meter work on a rb20? I notice my harness has a 5 plug 4 pin connector and the E60 is 3 pin.

I am not talking about the n60.

Sent from my SPH-M920 using Tapatalk 2

[nickisonfire]

Maxima maf

[DatsunZ31]

It is possible to run a E60 maf on a rb20 silvertop? I just wanna hear it start and run. Is it possible to run a RB without a air flow meter? Just wanna hear it start.

Sent from my SPH-M920 using Tapatalk 2

[Skym]

Infiniti J30 (VG30DE) MAF (probably easier to get hold of in US) and R32 RB20DET MAF are the same MAF (maybe different coloured stickers on the side of square part), as use the same MAF table on ECU.

Stock ECU can start, idle without MAF (stock ECU only feature). As far as I know, stock ECU sets a rev limiter at around 2500rpm and uses a preset voltage figure when MAF is not there.

[DatsunZ31]

would a stage 1 mines ECU support this feature? just want to hear it start and idle everything else can come together after.

[Skym]

Yes....Only things different on Mines ECU is the 24pin EPROM chip with glue over the top of 24pin EPROM chip to stop chip from dislodging from 24pin EPROM socket. Also sticker on ECU case saying it's a Mines tuned stock ECU and for what mods it was tuned for via part number or similar (probably only Mines in Japan would know what it is tuned for). The rest of ECU is a stock ECU.

I have started my cars engine without plugging MAF in (forgot), so I know it can do this.