Tweet
OK so I bit the bullet and bought a .67 turb front mount, manual controller (still in the air) fpr, and a aem air/fuel wideband I hooked.it all up and she's over boosting was expecting that but what got me stumped is she is fine starting up running 13s at idle but as soon as I get into boost even tho its only for a second she spools Maga fast and I bypassed the solenoid to get rid of the 4500 rpm cut there but when she gets back to idle she at 10-11 and code flashed 12 but I had just replaced this frigging maf 100 clicks ago no way it can be gone already is it?? Also I cleared the codes and worked fine for about 5 mins but then right back to pig rich mode as.soon as I got to stop sign ran codes again this run and 55 all clear what can be causing this or do I just need to turn down the boost stock ecu as well any suggestions?
Comment