Announcement

Collapse
No announcement yet.

rb25 lean on wet cold starts

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • rb25 lean on wet cold starts

    hey my rb25 s2 runs very lean under light acceleration and cruising under boosting its fine and it only does this when the air is damp on coldstarts car also runs rougher

  • #2
    Sounds like a vacuum leak

    Sent from my SGH-I337M using Tapatalk

    Comment


    • #3
      where abouts do you think

      Comment


      • #4
        Need more info :AFR when that happens and when it's hot at idle, mods, tune, mileage? Check the basics like O2 sensor voltage if you can find someone with a scan tool or Consult , MAF, air filter, fuel filter , fuel pressure?

        Sent from my SGH-I337M using Tapatalk

        Comment


        • #5
          93k for mileage
          mods - turbo back exhaust, boost controller,intake, decat
          fuel filter was just done, fuel pressure not to sure using stock fuel rail n stock fuel pressure regulator, my 02 sensor is unplugged maf is clean
          afr when its hot at idle is usually 13.7 - 13.9

          Comment


          • #6
            https://www.youtube.com/watch?v=zECvNvzu8YY video of it cruising when it warms up runs normal

            Comment


            • #7
              Enjoy the videos and music you love, upload original content, and share it all with friends, family, and the world on YouTube.

              Comment


              • #8
                Sure your wideband is reading right? Not trying to **** on you, but it looks Pretty shady with the zip ties. Have you tried doing a free air calibration?


                Sent from my iPhone using Tapatalk
                Come on lotto!!! Daddy needs a whole lotta stuff!

                Comment


                • #9
                  its reading correctly u can also feel a difrence when it starts to lean out

                  Comment


                  • #10
                    the units brand new and aem states that their sensor doesn't need a calibration the sensor went in not to long ago

                    Comment


                    • #11
                      rb25 lean on wet cold starts

                      Nissans run rich from factory.... But that's wild. Why have you unplugged the 02 sensor? Notice engine running warm at all?
                      Where did you install the bung?


                      Sent from my iPhone using Tapatalk
                      Last edited by future_R34; 10-14-2015, 12:44 PM.
                      Come on lotto!!! Daddy needs a whole lotta stuff!

                      Comment


                      • #12
                        I unplugged it to install the wideband. I will put it back in i just haven't gotten around to putting another bung in the exhaust. Anyways its in stock location i got a tomei turbo elbow and its just installed in the elbow i know that it should be a meter away from turbo but but this is temporary and no runs normal or even a slight cooler after front mount install.

                        Comment


                        • #13
                          Your gonna toast the Wideband sensor there. You need to get it around where the cat is located. And if your factory o2 sensor is unplugged, 90% sure that's causing your fuelling issues.

                          Get it all hooked up correct and see what happens from there


                          Sent from my iPhone using Tapatalk
                          Come on lotto!!! Daddy needs a whole lotta stuff!

                          Comment


                          • #14
                            okay will give that a try

                            Comment


                            • #15
                              so i put in the new sensor car seem to run better now only thing is i get an occasional hunting idel

                              Comment

                              Working...
                              X