Attn Adam or Daryl or other "heavy hitters" ;)

[Bruizer]

So I bought a diff for my 32 and the oem output flanges/shafts are too small. Need these parts please.

I was told late R32s, R33s and R34s have these. I'll take new or used. Help! Parts #s as follows.

Rear diff flanges (30 spline?) which connect the rear axleshafts to the diff.
Right: 38220-12u00
Left: 38220-12u01

[Daryl @ RightDrive]

Will forward you pricing today, thanks!

[Bruizer]

Bump, still looking for a price.

These are rear diff output shafts but not the whole drive shafts, just the short stubs that go in the diff and end as flanges. R33 GTR and R34 GTR. R32 Vspec II MIGHT work.

[Daryl @ RightDrive]

Those part numbers don't come up on my computer nor Nissans. Where did you get them from?
What LSD is it that you are using in your transmission, and what flanges does it say to use?

[Bruizer]

Those part numbers don't come up on my computer nor Nissans. Where did you get them from?
What LSD is it that you are using in your transmission, and what flanges does it say to use?

OS giken rear diff in 1991 GTR says:

http://www.osgiken.net/products/superlock.html

Exchange with Genuine Nissan side flange pn: 38220-12U00 x1 and pn: 38220-12U01 x1

In the end, it's the R33 or R34 rear diff output shafts, only the short ones that go in the diff, they are larger than R32...

[Daryl @ RightDrive]

OK, I'll work it out today and let me know.

[Bruizer]

Any luck?

[support@feastauto]

Sorry Bruizer, been off the board as of late.
Those numbers work, and I emailed pricing to Anthony yesterday. Ill shoot you pricing in a second as well.