WTB: Cylinder head rebuild kit

[GTR_Russ]

Hello sponsors. Thought I'd give you guys the first try at getting my a rebuild kit for a RB26 cylinder head. Looking for something similar that raw brokerage offers:

http://www.rawbrokerage.com/Supertech-Cylinder-Head-Overhaul-Kit-RB26DETT-supertech-rb26.htm

I will be wanting 1mm oversized valves,dual valve springs, and valve seals.

I'm in no rush so if it will take you a few weeks to get that's no problem. Dont know if you can match or beat their price but with the CAD so high ordering from the states isn't so painful.

Shipping will be to V0C1R0. Pm me with what you got!


Thanks!

[cortexx]

Have fun grinding in the Inconel valves , you'll take all the material off the seats and none off the valves . When mine was done an inspection of the exhaust valve showed only very slight marking lol - total time to grind them in correctly was 4 hours in a machine shop If you intend to do them yourself you'll need alot of time and beer - the material they used is inconel x750 and it's as hard as hell .

I used
Supertech +1mm exhaust valves (inconel)
Supertech +1mm intake valves (black nitided stainless)
Supertech Manganese bronze guides
Brian Crower single springs (made by cosworth)
Brian Crower titanium retainers (made by cosworth)
Nissan vavle seals
Nissan gasket kit
custom made spring shims
Nissan collet set


The valve seats were machined to take the bigger valves and the gap between the 2 inlet valves was so tiny they almost touch each other