VEX Performance is Officially Moving!

[RWDragoon]

VEX Performance is Officially Moving!

Our new address is 5720 1st SW Calgary

We will be closed from June 17-21, 2013 for the move but should be full function June 24th.

The new shop is over 9,000sq/ft of usable space (almost 2x current shop) with the possible future expansion of another 4,000sq/ft, not including a HUGE paved, fenced, locked yard. We are very close the C-Train and now in zone for Car2Go, and only a few blocks from Chinook mall!

We are also building a dedicated sealed 4WD Dyno Room with AirBoy Tuning coming in house with us! Apx 50,000cfm of air flow, and a Dyno-Dynamics 4WD Chassis Dyno!

If we need to reached during the move email will be best at ryan or jimmy@vexperformance.com We will be keeping the same phone number 403.243.1111 as well!

[NismoS-tune]

You guys hav an in house high end builder and who is your machinist? Looking for a serious builder and autodream is not replying emails.

[RWDragoon]

We treat all engine builds very seriously. We are very picky with the parts we choose and the procedures we do. All engines are fully blueprinted in house and machined with deck plate(s)

Right now our demand is so high we are 10+ weeks behind on engine machining, so it depends on how fast you need it done as well.

[NismoS-tune]

We treat all engine builds very seriously. We are very picky with the parts we choose and the procedures we do. All engines are fully blueprinted in house and machined with deck plate(s)

Right now our demand is so high we are 10+ weeks behind on engine machining, so it depends on how fast you need it done as well.

I have a machinist lined up if that's the only delay. My tomei stroker is still at WPC I think

Franc

Ps who does your machining?