Announcement

Collapse
No announcement yet.

DEAL: Injector Dynamics & Powerhouse Racing Fuel Rail Combo!

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • DEAL: Injector Dynamics & Powerhouse Racing Fuel Rail Combo!

    Hi guys,

    So we have an overstock of product here and need to get rid of it. Now is the best time to purchase the hands best injector on the market and IMO the best looking fuel rail available for the R32 Skyline!

    -------------------------------------------------------

    Injector Dynamics

    For those that don't know Injector Dynamics here is a bit of information on there product! Some of the best tuners in North America are using these injectors and swear by them! Many NHRA cars have switched to ID, and we have also used a couple sets in vehicles including Ben's RB26 which idles like stock without a tune. We simply will not sell you any other injector these days period!

    * Injector Dynamics was the first injector offered with full dynamic characterization providing tuners with the data they needed to do their job properly.
    * ID was the first injector to be offered in dead time matched sets.
    * ID was the first high impedance high flow injector available providing stock idle and drivability on engines as small as 325cc per cylinder.
    * ID was the first injector offered with the now famous "Top Hat Adapter" making it plug and play in nearly any application.
    * With a maximum pressure capability of 7 bar and excellent low pulsewidth extension, this is a versatile injector that will be at home in many different applications.
    * From high power high boost daily drivers, to NHRA Pro Stock Motorcycles and record setting turbo road race sedans, the ID1000 set the standard and marked the beginning of a new era in fuel injector performance.
    * Nominal Dynamic Flow Rate - 1000cc/min @ 3.0 Bar (43.5 psi) Using Gasoline at 52 Degrees C (125 Degrees F)
    * Fuel Compatibility - Compatible With All Known Fuels

    Few absolutely amazing cars running ID.

    -John Reed Racing Lamborgini Gallardo
    1/4 Mile: Mid 9s @ 169MPH on street tires.


    - Tony Palo T1 Race Development 8 sec Integra


    Ben's RB26 with ID1000s


    Powerhouse Racing

    Powerhouse Racing has evolved around quality and perfection and with the new Skyline community we bring the High Flow Fuel Rail Kits that come in both Polished and Black Chrome. These rails are always in stock and have key features that leave other companies behind:

    * Injector bosses which replace the rubber orings to but a tight fit on the o-ring on the injector.
    * Black Chrome or Polished.
    * 14mm Domestic Style Injector Size or 11mm Denso Style Injector Size.
    * Mounting Brackets for either RB25DET or RB26DETT

    NOTE - All Fuel Rail Kits come with a full install kit, nuts, bolts, orings, fittings and mounting brackets to make this a breeze of an install!

    MSRP: $450.00 USD





    Ben's RB26



    ---------------------------------------------------------------------------------------


    SOOOO finally to the deal! It includes the following.

    - 6 Injector Dynamics 725 or 1000cc injectors including all the hardware pictured below. (2000cc available at higher price)
    - 1 Powerhouse Racing Polished Fuel Rail kit with everything pictured below (currently only polished in stock, slightly more for black chrome)

    Normal Price: $1049.00 USD + shipping, gst and customs

    Special Offer Price to GTRCanada ONLY:

    $899.00 USD


    * shipping, 5% gst and any applicable customs charges are extra.


    Picture courtesy of PHR


    We accept Credit Card, Interac Debit, Paypal, EMT, Wire Transfer, Certified Check, or cash in hand.

    Regards,

    Braden @ JNS Imports
    Last edited by JNS Performance; 02-15-2011, 05:38 PM.
    2009 Mercedes C63 AMG. Daily
    1969 Cooper S. Restored
    1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

  • #2
    Guys I have the same kit on my rb25 it looks great and is functioning great. No mods were needed. Drop and go. I can take pics if this helps
    Miss driving sooooo bad! Need to get a car on the road ASAP!

    Comment


    • #3
      Thanks Chris,

      ID & PHR are ballerrrr. Best injectors I have EVER used! We have sold quiet a few sets, if people need more input I could get people to chime in

      Regards,

      Braden @ JNS
      2009 Mercedes C63 AMG. Daily
      1969 Cooper S. Restored
      1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

      Comment


      • #4
        Originally posted by Braden @ JNS Imports View Post
        * Fuel Compatibility - Compatible With All Known Fuels
        how about fuels with MTBE like q16 and vp import?

        Comment


        • #5
          Yes sir these can run Methanol , E85, Race Fuels.... basically anything.
          Last edited by JNS Performance; 09-14-2010, 09:36 AM.
          2009 Mercedes C63 AMG. Daily
          1969 Cooper S. Restored
          1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

          Comment


          • #6
            How much more for 2000cc?

            Comment


            • #7
              Hi sir,

              2000cc/Rail: $1599.00

              Basically I have to sell the Injectors at ID's MAP price ($239.95 USD each) however I can give extensive deals on the fuel rail. With that price your basically paying $160.00 for a $350-$400 rail

              Regards,

              Braden @ JNS
              2009 Mercedes C63 AMG. Daily
              1969 Cooper S. Restored
              1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

              Comment


              • #8
                i will post some pics but i dont know how to post pics anymore. i have a few good ones that can show the quality of the product. Let me just say if i have a chance to get anything else through powerhouse like i dont know say a new trubo set-up i think i just might!!!! Oh wait I am going to!
                Miss driving sooooo bad! Need to get a car on the road ASAP!

                Comment


                • #9
                  my engine bay with new phr products

                  ok here are 2 pics of the phr products. i was not only supplied with a killer fuel system but i also got some sweet lines from them 2. Anyways i will take some more pics to show you up close the greatness and quality of phr!
                  Attached Files
                  Miss driving sooooo bad! Need to get a car on the road ASAP!

                  Comment


                  • #10
                    Anyone used these on a RB26 ? how well did they set up ?

                    Im thinking 720cc injectors with my setup.

                    Comment


                    • #11
                      Have sold them to 13 different GTRC members so far all with nothing but great things to say. Let them speak up if they see this thread, prefer not to give out names/information. For more information check out Supraforums. Tons of guys over there are running them making anywhere between 500 - 1300 hp lol

                      For people wondering how long this deal will go on for... its basically until I get rid of 12 rails (6 gone so far) which will leave me with 2 in stock. Injectors I have 3 sets of the 725's and 3 sets of the 1000's in stock.
                      2009 Mercedes C63 AMG. Daily
                      1969 Cooper S. Restored
                      1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

                      Comment


                      • #12
                        Originally posted by Hyrev View Post
                        how about fuels with MTBE like q16 and vp import?
                        ID2000s cannot run any OXYGENATED FUEL IE: VP Import.

                        Comment


                        • #13
                          Originally posted by Braden @ JNS Imports View Post
                          Have sold them to 13 different GTRC members so far all with nothing but great things to say. Let them speak up if they see this thread, prefer not to give out names/information. For more information check out Supraforums. Tons of guys over there are running them making anywhere between 500 - 1300 hp lol

                          For people wondering how long this deal will go on for... its basically until I get rid of 12 rails (6 gone so far) which will leave me with 2 in stock. Injectors I have 3 sets of the 725's and 3 sets of the 1000's in stock.
                          Is this deal still on? Ready to buy now.

                          Comment


                          • #14
                            Yep we can still offer this for you. I am replying to your PM right now!

                            Regards,

                            Braden @ JNS
                            2009 Mercedes C63 AMG. Daily
                            1969 Cooper S. Restored
                            1994 Rover Mini 1460cc, 134whp, 7 port fuel injected w/ITB's, & straight cuts w/ 4.67 gearing

                            Comment


                            • #15
                              PLEASE keep this running through Febuary.
                              As soon as I get my tax returns back, this is the first thing i will buy if you still have this deal going!!
                              -George
                              91 300ZX 2+0
                              Built RB25 in works, 2 year project hopefully completing this Spring!!
                              Ttop to slicktop convertion/slammed and shaved everything/10 point cage/ Fully built RB25/Comp t68tbb/twin tial gates..ect ect

                              Comment

                              Working...
                              X