Announcement

**Daryl @ RightDrive** · 07-20-2012, 08:55 PM

If you mean for HCR32, then it looks like it:

Driftworks 4 Arm Kit for Nissan Skyline R32 GTR - V2 Black

http://www.driftworks.com/shop/driftworks-r32-suspension-kit.html

The essential arms to get your Nissan handling the way it should. The Driftworks R32 GTR 4 Arm Kit comprises of:2 x Tension Rods - allow for a wide range of caster adjustment – increasing and decreasing caster can alter turn-in aggression, mid-corner feel and ease of control2 x Rear Camber Arms - these allow for a wide range of camber adjustment for altering grip levels, tyre wear and wheel fitment2 x Rear Traction Rods - determine the amount of toe-in that is applied to the rear wheels under compression, altering traction levelsHICAS Removal Kit - allows for toe adjustment and locks out the HICAS system2 x Optional Front Camber Arms - dial in your front end grip, alter tyre wear or correct your wheel fitment Available with either Rod Ends or Poly Bushes Please note: Driftworks does not recommend installing a single arm when changing alignment arms from the OEM items. Driftworks Polybush Rod Ends are designed to be used in conjunction with all three rear arms; Camber ArmToe ArmTraction Rod It is possible to use a single adjustable arm on its own, but with a Polybush Rod End you can put the adjustable arm under extreme stress as the non adjustable arm pulls against it at maximum short length. We have found that on a lowered car setting the Traction Rod 12-15mm longer than the OEM arm gives best results, depending on ride height you may need to lengthen it more. Users should be aware that when using a single arm on its own the arm must be set to an acceptable length where the other arms are not pulling it into misalignment. As a rule of thumb, if the arm is really difficult to fit and mount up, it is probably set to the wrong length. This can cause premature wear in the Polybush holder itself. If you have any doubts about the installation, please have these arms installed by a professional with experience of aftermarket suspension components or contact us at Shop@Driftworks.com and we can advise.

I'd contact them directly to order, there are no Canadian shops that sell their stuff that I know of. We can import it for you if you like, but there will be a fee.

**Bee-RSkyline** · 07-22-2012, 04:58 PM

thanks daryl

**NismoS-tune** · 07-22-2012, 05:21 PM

I buy lots from them directly, all good. Even resent parts if they were damage (1 time, the package was crushed)

They dont sell massive packages but you gather them in your cart and make your own package.

I have driftworks r32 gtst front lower control arms and tension rods for sale, new in box, cheaper than what they'll ship it for (since I already paid the dues/customs/overseas shipping). Selling because they don't fit the gtr

So get anything else you need but these will be cheaper for sure. My loss...

**gtstevan** · 07-22-2012, 08:36 PM

Ams makes an identical hicas delete kit and are sold in ontario i bought through a member on here

Announcement

ATTN: Sponsors - driftworks suspension

ATTN: Sponsors - driftworks suspension

Comment

Comment

Comment

Comment