JIC 505 Spartan Titanium / Stainless Race Exh - BNR32 R32 2/4Dr.

[support@feastauto]

Not for everyone this one - JIC Spartan 505 race exhaust. 1mm thin wall titanium canister, stainless front section, nearly 3.5". Quite low use, canister underside with light scratches. Top side of tip will be cleaned up as there is bumper residue showing in the photo.

With surface shipping (4-6 week), total @ SOLD
Exchange => www.xe.com


Optional Extra:
Stainless 80mm de-cat with A/F & factory EGT bung @ 7,500 JPY
Not your average de-cat with additional bungs. A/F bung kinda vital when tuning.

[support@feastauto]

Updated photos below of the JIC Ti/SUS system. That residue came off easily, tip in pretty good shape now.

[h4X6]

Sexy as hell. Glws

Sent from my A510 using Tapatalk 2

[M13]

do you have the weight specification by any chance?

cheers

[support@feastauto]

do you have the weight specification by any chance?

cheers

This JIC system 9-10KG max. Ti canister has straight through center section with some perforated baffles. As for baffling its believed to be either stainless or fiber type. Piping nearly 3.5".

Similar full ti race system will be in the 7~8KG marker. And oddly the Silvia runs a Kakimoto GT1-OZ in stainless, but with 1mm thin wall piping its also dead on at 7KG

[support@feastauto]

Yeah 4400 posts

You guys gotta hear the Silvia with the GT1 OZ system. I swear it sounds like a nasty rotary when under boost. Wicked zingy sound to it.

[support@feastauto]

Looking to sell, please take 2000 JPY off delivered price.