FS: ARC RB26 BOV and pipe

[support@feastauto]

Have a spare used in stock, good shape in and out. This replaces the charge pipe just in front of the factory air box.
Delivered total at SOLD JPY
Exchange => www.xe.com

PM if you have interest, photo of actual item below.

[bobbo]

Is it atmospheric or recirc?

[zac3ne2nr]

Adam can you look at the flange and see if it can bolt onto an RB20 stock position.
If not can you local a TypeS for RB20 for me?

[support@feastauto]

Is it atmospheric or recirc?

As it sits this is atmospheric. However it would be wise to plumb it back into the intake with a bit of hose & flange work. And at the same time removing the complete factory recirc piping. All that extra piping is rather irritating and prone to leaks at old age.

[support@feastauto]

Adam can you look at the flange and see if it can bolt onto an RB20 stock position.
If not can you local a TypeS for RB20 for me?

Zac, in the case of RB20/25 with FMIC; it would be best to block off the factory flange and introduce this pipe with reducer couplers X2 on either IN/OUT side of IC. Quite easy to do if your going FMIC style down the road. Otherwise not sure on a flange adapter with ARC not offering this style anymore.

[bobbo]

As it sits this is atmospheric. However it would be wise to plumb it back into the intake with a bit of hose & flange work. And at the same time removing the complete factory recirc piping. All that extra piping is rather irritating and prone to leaks at old age.

Hmm. I'm gonna hold fast until I get the front of the car all apart and see where I'm at. It seemed to be an ideal set up if it was "plug and play" recirc set up.
Thanks all the same.

[support@feastauto]

Price update - 11,500 JPY shipped.
Exchange => www.xe.com

[support@feastauto]

Still have this for anyone needing