The Light Thread

[bignate]

ok so I've seen a whole bunch of different threads on what type bulbs go where ect. So I though I would put all this info in one place. It's about time I contributed something here. Mods please sticky this.

Headlights

Projector:
High beam=H3 (2)
low beam=H3C (2)
Driving/parking light=194 (2)

N1:
High/Low=H4 (2)
Fog Light=H3C (2)

Signals/Brake Lights

Front Signal=1156 (2)
Front Side signal=194 (2)
Brake lights (both)=1157 (4)
Rear Signals=1156 (2)
Reverse light=1156 (2)

Interior

Cluster= 194 (5) and 74 (2)
GTR triple gauge= 74 (3)
Dome light= 31mm
Cargo lights (at the front)= ba9s (2)
Trunk=194

[all2big]

08/20/'91 Minor change= Projector light modified H3C->H1

[Terrh]

woot, I guess my H4 hi/low HID's will fit!

makes me pretty happy.

thanks for the info, I've been trying to find this out for a while.

[JzGarage]

Whoever need HIDs,

We have any fitment you need for your vehicle!

Just check our page or send us a PM!

[doc]

anyone sell LED's for interior still? most posts on LEDs are from at least 2 years ago

[DarkCaporaL]

Try this:

http://www.skylinesaustralia.com/forums/Dash-Light-Leds-many-Col-t158385.html&hl=led

[NeptuneGTR]

Damn it took me awhile to find this, thanks for the info bignate!!

[Oakville]

now someone do this for 4th gen accords!!!

lol thanks Nate, Ill bookmark this

[quadracer111]

Theres a light in the trunk?!

Can someone tell me where?
Thanks

[markc32]

climate control bulbs 6x 60ma microbulbs from radioshack/source city and same for the hazard, radio, defroster headlight switch and driver window switch

[bellis_GTR]

Hey guys i got a 92 GTR with projectors. Im having a problem with my HIDs fitting right. I took out the stock bulbs from the projector and I see I have some kind of adapter to fit an H1 bulb, but the adapter its self is an H4 or H3. The HIDs come with a H1 attached to the harness already and can not put them on the adapter.

What kind of HIDs would I get to fit these projectors?





Sorry about pic size

[frankiman]

the GTR's projectors need H3C bulbs
H3C bulbs have 2 terminals coming out of them, unlike H3 ones

[bellis_GTR]

Sorry still a bit confused. How would the HIDs stay in place if the stock headlights have a clip on them to stay in the headlight and not move. What bulb assembly do I have in the picture?

[frankiman]

not sure, since i have N1 headlights..
but you might need to splice the HID's wires into the stock wiring, you'll need that 3 prong connector for the ground

[Bossman]

The plug is a H4, the bulb is a H1 and I'm guessing the base is a H3C because the earlier housing uses H3C bulbs. Looks like the UK people seems to have ran into this problem too:
http://www.gtr.co.uk/forum/66780-hid-r32-gtr.html

I say get a H3C hid kit and a pair of H4 pig tails and do some minor rewiring? BTW how is the high beam wired? I have the earlier version and the H4 plug has a adapter and the low beam would go to the H3C wile the high beam would go to the H3 with both ground wires going back to the H4 plug.