What's all ya'lls plans for winter?! - lets hear em....

[frankiman]

a friend of mine can get HSD coilovers for dirt cheap

[archaeic_bloke]

My plans....

- get car insured
- replace rear window seal
Thats about it for me....hopefully can get it all done by spring!

LOL how come u don't have insurance yet!? and when are you actually back in canada? also, this rear window trim... didnt know it was possible to get that, any chance you could PM me with pricing on the rear window seal and trim and also the side and front window trims? mine are faded and having fresh ones would be SUPER sweet... lemme know!

Step 1: Sell my twin turbo setup.
Step 2: Buy a stock rb26dett from a JDM shop.
Step 3: Swap my rb26 for the stock rb26.
Step 4: Sell my r32 gtr in its stock form (remove all aftermarket stuff)
Step 5: Buy a mystery chassis (not an s-chassis)
Step 6: Fit my rb26 into this mystery chassis. With a big single turbo.
Call it a day!!!!

... you lost your mind? or are you pulling our legs? ... lol your plan is getting crazier by the day man!!

If all goes well carbon racing seats, cf driveshaft, cf spoiler, cf front lip, z32 mafs, big fuel pump and injectors, and forged 2.8. Cross your fingers!

dude CF shaft is really kind of pointless, like others have said, you can gain a lot more response using something like cams and light weight flywheel for the price of the CF shaft... i've only seen like one or 2 other cars use the CF shaft and those were UK drag cars. BUT if u do get one anyways.. props on baller status.

1.5 mil Tomei HG
ARP headstuds
Greddy timing belt
Tomei valve springs
Install ported head
Rebuild turbo
Have RB 20 cams machined
Oil catch can
HSD coilovers
HPS pads
AMS Slotted rotors
AMS Adjustable UCA FR/RR

MOAR WEIGHT SAVINGS!!!!!!11111!

Oh and colour change... Green perhaps.. Powdercoated, so call me when you go Josh..

360whp stock RB20 here we to baby..

I'll be getting mine done at the same place mitch got his done, i really like mitch's the way they came out is perfect powder coat, and he says it wasnt't outrageously expensive, so i will definitley give you a call to put urs in at the same time as me, you'll have to wait and see my color scheme tho... its goinnna beeee siiiickk. (I think),

a friend of mine can get HSD coilovers for dirt cheap

i'm considering getting my Tein's rebuilt by Selex, i know you used them before, did they do a good job? and price wise what should i expect?


and last thing i wanna say, is i'm not sure who would want this, but i think theres a few of you out there who might be interested:

http://montreal.kijiji.ca/c-cars-vehicles-auto-parts-tires-engine-engine-parts-JDM-NISSAN-SKYLINE-GTR-R34-RB26DETT-ENGINE-MT-6-SPEED-TRANNY-W0QQAdIdZ239868668

Tokyo motor imports has that, R34 GTR engine, with harness ecu and tranny!!!! ... but stupid them they didnt keep the half of the rear drive shaft...lol!!! they're asking $8000, if you walked in with cash in hand im sure they'd take 7, it looks in good condition. and im actually going down to she shops today to get some filming done for that part of our film,....

also a few of ther other shops in MTL now have an entire R34 GTT and R33 GTR that they've chopped, front half, back half, cut right down the middle and brought in incase anyone was looking for parts from those cars.

[Ricky Ricer]

1. Put my 2530s in
2. Buy more mods
3. Profit?

[frankiman]

i'm considering getting my Tein's rebuilt by Selex, i know you used them before, did they do a good job? and price wise what should i expect?

don't bother, their price is "good", but its 1/2 the price of a brand new HSD set
and i'm not pleased at all with the rebuild, i mean, the coilovers look great and all, but they feel less confortable than before, they "crash" alot on small bumps, and the car will bounce repeatedly on certiain roads at higher speeds, their "improved" self adjusting valves just don't do it for me
anyway, i want to get slightly stiffer springs, 9&7 instead of 8&6,

[cobrAA]

a friend of mine can get HSD coilovers for dirt cheap

this is why I'm saying we should do a group-buy or something along this idea..

[archaeic_bloke]

LOL alright i won't bother with them! mine are still working perfectly, i just usually like to refresh everything that i can, i used to work for DMS suspension, theres a retailer/rebuilder on the south shore he runs Moore Sports International, and works closely with the DMS out of AUs.... i may give him a call and see if i can swing by to rebuild my own shocks (that was my job there, i was rebuilding DMS suspensions for the subaru world rally champ. cars,)

if anyones interested, i can source a set of DMS coil-overs, but i'll warn you they are probably the most expensive brand out there.... lol

http://www.dmshocks.com/Products/tabid/445/language/en-US/Default.aspx

[ColinR33]

Fix front bumper
Install spacers
Install SS Brake Lines
Install Apexi Intakes
Install HICAS Delete bar
Install oil filter relocation kit
CF Wrap IP & stack
Powdercoat wheels, cam covers, TB cover, coil pack cover
Install Vipec ECU, O2 sensor, TUNE
Install CF gauge pod
umm....whatever else I can get in under budget/sneak past wifey.....

[Oakville]

sell this whip in my garage and buy a gtr. that is all.

[advent]

sell this whip in my garage and buy a gtr. that is all.

+1!!!!

[Tony-R32]

Insure it

Clean up and finish off interior:

Boots
knob
hook up guages
floor matts
dash lights
pedals (does anyone know if u can get full pedals or just covers cause i have metal pedals that don't look so good but i don't think they would hold covers very well)
tuck wires away
glue peeling door fabric

Under the hood:

New intake filter
new coolant overflow tank (weapon r)
new plugs

Exterior:

New rims hopefully

Thats all i can think of for now!

[NismoS-tune]

Yes it will take a lot of cash, that's why it will be a semi slow process. I got 3/4 pieces of the IC piping kit from a member at a STEAL of a price. the HKS suction kit is about $900 isn't it? And it also contains the 4th piece for the IC piping, the piece on the hot side, from the turbos to the piece in the frame.

The Greddy "not as pretty one" is about $900. I have the HKS racing chamber which I won't be using, up for grabs. I got an excellent deal on it so I asure you a good price for it. PM for detail. Mine would sell for less than $900. New in box.

http://www.tunerlab.jp/hks-racing-chamber-kit-p-1022.html?osCsid=f7c730b0936df74da1889cbe40e860a7

MSRP is 75,600.00 JPY = 938.411 CAD

Badass!

[jdms13rhd]

working on my Vert for the first time in 4 years. Just swapping in new motor, GT28, rail, PFC, greddy in-mani, injectors, wheels, suspension and a 2-way. Started a couple weeks ago and worked on it for a few days. Got the motor back in already. i just need to wire in the injectors and swap in my zeal coilovers then tune it up.

As you can see, i have migrated into my ol ladies parents garage. Trying to make due :S Couple pix:





prob got a few more days left of work on it. Once that car is done I am finishing up my rb26 build for my cefiro. Still need to toss the pistons in and then assemble the rest. Closer to spring, I need to go back to Alberta to bring the cefiro shell here, wire in the painless, drop engine in, tune ect ect. Im going to kick my own ass if I dont get this car done this winter. crossing my fingers!

I'm at this point with the ceffy, cage is done now at least:

[URL=http://img196.imageshack.us/i/cage2t.jpg/][/URL

[aN4rk1]

The Greddy "not as pretty one" is about $900. I have the HKS racing chamber which I won't be using, up for grabs. I got an excellent deal on it so I asure you a good price for it. PM for detail. Mine would sell for less than $900. New in box.

http://www.tunerlab.jp/hks-racing-chamber-kit-p-1022.html?osCsid=f7c730b0936df74da1889cbe40e860a7

MSRP is 75,600.00 JPY = 938.411 CAD

Badass!

You have a PM Sir

[archaeic_bloke]

@jdms13rhd - wow thats quite the projects you've got urself into, are these 2 cars for race only? or street too? lookin good, i love ambitious builds!

[jdms13rhd]

@jdms13rhd - wow thats quite the projects you've got urself into, are these 2 cars for race only? or street too? lookin good, i love ambitious builds!

The Cefiro is a race only. The vert, I've street driven since 2003. Dont drive it much anymore tho. The verts are okay but they flex and leak water ect. More for a unique cruiser.

Thanks