240sx seat rail same as r32?

[MikeRWK]

anyone know?

[Bossman]

In short no, but if you search the internet you'll find out then a few people have fitted Skyline seats into their 240sx with some modifications..

[plankworx]

nearly. 240 = one mounting tab is longer than in a 32, can just drill a second hole where needed, in most cases. r32 rail into 240 is gay because you have to weld an extension on. otherwise they are essentially bolt-in, in my experiece

[Nvdgtr]

does it matter what year 240? anyone know?..I know its a old thread but worth a shot.

thx

[Daryl @ RightDrive]

I wouldn't bother, the 240 rails need extensive modification and welding, not worth it in my opinion, just get the proper rails.

[Nvdgtr]

as the guy said above, whether hes right or not is different. looks as 3 out of 4 holes line up but for one and all i would need to do is drill a new hole?...

does right drive sell proper rails? if so could you pm me rough price?

thc

[GTR203]

nearly. 240 = one mounting tab is longer than in a 32, can just drill a second hole where needed, in most cases. r32 rail into 240 is gay because you have to weld an extension on. otherwise they are essentially bolt-in, in my experiece

This. There's alot of truth and alot of bs in this thread Ive done the swap a few times and its only difference that one outer rear mounting point AND that's a r32 and r33 s13 and s14

[Daryl @ RightDrive]

Yes and no, one side only one hole is out, the other side three of them are out and the whole thing has to be taken apart and welded. Depending on brand you also end up with a heightened rail as well, meaning the driver is sitting up high.

Proper Bride rails are $220-$280 depending on your car model and seat model. Bride rails can accept Bride, Sparco or Recaro seats. These rails are the proper ones for R32, and require no modifications.

[Nvdgtr]

Yes and no, one side only one hole is out, the other side three of them are out and the whole thing has to be taken apart and welded. Depending on brand you also end up with a heightened rail as well, meaning the driver is sitting up high.

Proper Bride rails are $220-$280 depending on your car model and seat model. Bride rails can accept Bride, Sparco or Recaro seats. These rails are the proper ones for R32, and require no modifications.

For a pair or each?

[Daryl @ RightDrive]

For a pair or each?

That would be each.

[DynamiteQC]

I bought a bride s13 or s14 ( not sure) rail for my OMP bucket seat in my skyline. Everything fit except one hole that need to be redrilled.

[Nvdgtr]

To let everyone know, i bought a set of rails from a 240 at the wreckers i believe it was a 1990. I made my own way of mounting them to my new bride low max seats. I have put the bottom bracket of the seat (w/rails) in my skyline r32 gtr to assure they all fit. Now i have put the seats back together and will install them when i go n take care out of storage. I still have to see how they line up with the peddles n what not but I'm pretty sure they are good. 3 out of 4 holes line up the 4th is the rear outside, you have to drill the hole.