Tweet
I went to a local and near by nissan dealership in hopes to get my gtr blank cut so i could stop using the hideous key that came with the 32. The problem is, they asked for a certain code which i didnt know i needed in order for them to cut it. Does anyone know of this code and what am i to say to the guys over at nissan to cut it for me? thanks!
-
1992 R32 GTS-T Type M -
perhaps stamped on your ignition tumbler ? -
Uhh take it to a Normal key cutter they should be able to cut it from your current key with a laser cutter thing, as long as your key isn't insanely worn out. better yet order this r33 blank Gtr key part no. KEY00-00185 can be found at any Nissan for $40 shipped to the dealership for freeLast edited by cooke24; 07-16-2011, 02:09 AM.Comment
-
The number is supposed to be on the driver's side lock barrel. Should be a 4 digit number.R32 GTR FULL SERVICE MANUAL DOWNLOAD:
http://forums.gtrcanada.com/faq/36-holy-bible-6.html#post467565Comment
-
-
might also just to to find another locksmith and buy a spare to get cut and tested. if it works, i'll then hand over my gtr blank to get cut.1992 R32 GTS-T Type MComment
-
just go t canadiantire perfect cut 2bux!
do not go to locksmiths that cuts it by eyeball they will **** it upToy: BNR32
DD: R50Comment
-
I was gonna say the opposite , I took it to crappytire and they f'd it up . I got them to pay for a new key .Originally posted by markc32Comment
-
maybe it depends on which cantire you go to? if you don't mind me asking which one did you go to markc32? yeah and to avoid a f*ck up, i'll start with getting them to cut a spare for me before they touch the gtr blank.1992 R32 GTS-T Type MComment
-
go to the one on steveston #5road...they have a machine and cuts it perfect....my first one i brought to a locksmith at the mall and it only opened my trunk and they said my gtr key is special material, so i rolled my eyes...cdntire cut it perfect my second one...wasted 50buxOriginally posted by M0nkeyMark View PostToy: BNR32
DD: R50Comment
-
thanks, definitely will give this a try.1992 R32 GTS-T Type MComment
-
the code on the lock on the drivers side door is NOT the code nissan needs ... already tried this ... didnt workComment
-
The key is made of hardened steel, it is stronger than a regular key, and harder on the wheel of the cutting machine.Originally posted by markc32 View Post
And I usually cut my keys at Canadian Tire too, but I'm the one cutting the key. lol
The little perk of having worked there.
Sometime it helps to pass the key twice even 3 time, if they put the machine on automatic (meaning the machine makes the movement from right to left). It also help if the machine has recently been calibrated, if done properly. lol And if you do get someone who knows how to work and adjust the machine it's always a plus. I already copied a key that was so worn that it had split in 4 pieces, and my copy worked on the first try. And then you have people that can't even copy a house key for sh*t, I know I have worked with a few. lol
Most Canadian Tire don't usually guaranty keys that weren't bought there, but on the other hand some of them won't charge you a dime for this reason.
One way to do it if don't mind paying for a spare, and since they usually don't move the key being copied while copying it, is to cut just a regular blank nissan key, go try it on your car (obviously you have to go there with your skyline or car you want to make the key for), and if it works perfectly THEN you try the GTR hardened key, and pass it like I said 2, 3 times.
Good LuckLast edited by collector240sx; 07-18-2011, 08:30 PM.14 VW Jetta TDI
05 Sentra SpecV - winter beater -
95 240sx (RB25DET powered)
95 240sx (
powered)
89 GTR - Money Pit -Comment
-
the last time I had a gtr key cut, the locksmith was doing a lot of mumbling under his breath complaining about they key being very hard...
..I thought Nissan had some sort of key cutting machine that stamped the key out,, or something ???Comment
-
You want to get a GTR key because you don't like the way your GTS key looks?Comment
Comment