400hp RB20DET powered R32 GTS-T on Tsukuba

[Skym]

400hp RB20DET powered R32 GTS-T on Tsukuba -

http://jonsibal.com/blog/2009/08/yms-hcr32/

Finally found some information and a incar videoclip (see above link) on this R32 GTS-T and what workshop built it. Runs around 1:00 minute laptimes at Tsukuba racetrack which is quick for a RB20DET. A GTS-R runs 59sec around Tsukuba.

Link to videoclip -

http://eyevio.jp/movie/228538

Built by this workshop in Japan -

http://www.yms-gyoda.jp/

But what turbo does this RB20DET have, maybe GTRS or similar, as can't find specs on engine???

[doublejceballos]

WOW skym, that is one sweet gts
i absolutely love that car
fantastic

hes rocking a nice set of workmeister s1's

[Skym]

When driver doesn't have traffic to contend with, so can stay on the racing line, should be a sub 1 minute car. That one car road block and bad line through some corners that scrubbed speed off probably cost 2 sec laptime.

Also engine is still 100hp or so shy of what the engine can potentially produce hp wise and be reliable, and car can be lighter, so there's room for improvement.

Compare the above R32GTS-T to this 2 litre 4 cylinder Silvia on the same racetrack that runs 58sec -

http://www.youtube.com/watch?v=XpFPk2PiSf0

Also Yashio Factory S15 time attack racecar that runs 58.11sec around the same racetrack -

http://www.youtube.com/watch?v=IP6olZBBxvM

Shows what a similar cars with similar capacity engines can do around that racetrack with good lines through the corners. But I think those Silvia engines have more hp (maybe 50hp+ more).

Actually 120hp more for Yashio Factory S15 with sequential gearbox -

http://www.driver.ie/forum/showthread.php?t=41649

It makes that R32 GTS-T look more impressive with only 400hp and non sequential gearbox.

[Rapier46]

fender flares fail

[Skym]

Form follows function.

Laptime breakdown from times mentioned in video link -

First sector 25.217 sec
Second sector 24.893 sec
Third sector 10.913 sec

Total 61.023 sec or 1.01 laptime.

[support@feastauto]

Quite popular that one. Been featured in G-Works, Option and Rev Speed numerous times now.

[Skym]

Any idea what issues of those magazines, or rough specs of engine???

[support@feastauto]

Any idea what issues of those magazines, or rough specs of engine???

With in the last 6-8 months. Dont keep the three top monthly mags around for long. Usually just pass them down to customers as a bonus.

[doublejceballos]

fender flares fail

im pretty sure thats all win

[CDGuy]

Those fender flares look ballin, and the whole car looks alot like my dream Skyline...

[Skym]

Thanks Feastauto for the help.

I can find this post, where it looks like they fit a R33 turbo to the YMS HCR32 democar (including dynochart) -

http://blog.goo-net.com/tochi/archive/855

But for 402hp at engine, must be something bigger turbo wise.

I can see why YMS HCR32 is popular, winning GT-3 class in BP Super Attack more than once.

BP Super Attack 2006 round 7 -

http://www.clever-racing.com/BPSA/2006BPSA/2006BPSA7/06BP7res.htm

BP Super Attack 2007 round 6 -

http://www.clever-racing.com/BPSA/2007BPSA/2007BPSA6/07BP6res.htm

Full list -

http://www.clever-racing.com/BPSA/BPSAtop/BPSAkako.htm

Lapping faster than FD3S, S14, S15, etc. Very impressive.

[support@feastauto]

YMS is great. There Eda246 shop is quite close to my office. Unfortunately due to the bad economy they have downsized considerably. Gouda shop for instance is one of there last tuning related car depot's. Believe this is the only YMS shop in all of Japan that offers CPU tuning service with dyna packs in house.

They have several demo cars aswell. A track prepped S15 Spec R, Yellow Levin as seen in your link sometimes, Z33 Fairlady audio car. CBA-R35 GT-R audio car.

[Browny_R31]

wow that r32 has amazing brake stability and handling. like a go kart!!! good vid

[BurlyR32]

Is there a built sheet anywhere for this? be interested in what all has been done.

[Skym]

That's what I've been trying to find (specifications).

From external photo's, looks like it has ProjectMu brake rotors (green coloured rotors), ProjectMu pads. Definitely running on wide semislicks due to no wheelspin.