ummm so u didnt allow for any heat expansion?
Announcement
Collapse
No announcement yet.
F/S RB26 crank collars. Fits N1 oil pump ect. Proper Clearance!!!
Collapse
X
-
Ben is right.
Your not going to expend .002 of an inch from cold. If that were true your engine would seize after it warms up.
Thanks for the pic. was going to find one to post up but that is what I was trying to explain. You can see on that crank how little contact there really isALLEN PETERSEN
Number (604) 961-2449
4XTOYS/ Lower Mainland Skyline Service and aftermarket RB parts.
RB30`s for sale!
Comment
-
as for the head drain fitting; I only got one made last time so Im getting a quote to get a bunch made up and will have a price up in the next few days. As soon as I do I'll PM you and let you know.ALLEN PETERSEN
Number (604) 961-2449
4XTOYS/ Lower Mainland Skyline Service and aftermarket RB parts.
RB30`s for sale!
Comment
-
I am currently rebuilding my engine because of this issue. My GTR is a 1990 and yes I blew a shift and redlined it hard!! The pump didn't blow when that happened but the next day i took it out it made a gear wining sound and then stopped and the oil pressure light came on. I was lucky i was at low idle when it went and saved my engine and crank bearing surfaces. The inner gear split in two and the crank spun all the way around it causing the 5mm contact area to round off. I bought a used pump that I'm not going to use and it shows the contact area and it does take a beating. I am a machinist and i am going to machine my crank and my own collar for my new N1 pump and yes they need to be a tighter clearance fit.
Comment
-
This package you're making has me interested, any word on a price?Proud owner of the 2nd Skyline and the only GTR on the island!
Boost@14PSI, YellowJacket Coils, Extreme TSC, Full Nismo N1 Bodykit, Greddy Speed Cut Controller, HKS Turbo Timer, 280LPH Denso Fuel Pump, Nismo Slave Cylinder, AMS BOVs, Nismo Clutch Pivot, ACT Xtreme 6 Puck and HDPP, Greddy Panel Filter
Comment
-
Originally posted by jeff View Postjust got my crank collar and it's perfect!! fits the stock and n1 pumps.
now for the machining part of it all....ALLEN PETERSEN
Number (604) 961-2449
4XTOYS/ Lower Mainland Skyline Service and aftermarket RB parts.
RB30`s for sale!
Comment
-
Im all out of collars. Im getting more made up Monday and will have a price posted for the oil drains for Tuesday and they will be ready for then too.
sorry for the delay guys. Got pretty busy late this week with an insurance claim I was in the middle of.ALLEN PETERSEN
Number (604) 961-2449
4XTOYS/ Lower Mainland Skyline Service and aftermarket RB parts.
RB30`s for sale!
Comment
-
Sorry for the late reply's guys!
Should have everything for tomorrow.
I'll get pictures of the drain up tomorrow but its self explanatory. -10 an fitting right in the rear welsh. Press fit. Just toss the fitting in the freezer and heat the head up and toss it in.
Head fittings are going to cost $65ea Plus shipping. Since it is over 2cm I have to ship small packet. It will be approx $9 to ship it. If you want me to send it Air rather than Surface its an extra $1.50 approx. All within a couple bucks. once I ship out the first one i can post the exact price with small packet and express post price. You will only be charged $65 tax free plus the shipping cost. If you buy a collar and a head fitting together i can do the pair for $250 Shipped anywhere in Canada.
Price may go down next production.ALLEN PETERSEN
Number (604) 961-2449
4XTOYS/ Lower Mainland Skyline Service and aftermarket RB parts.
RB30`s for sale!
Comment
-
So when are these packages going to be sold? im really interested in oneProud owner of the 2nd Skyline and the only GTR on the island!
Boost@14PSI, YellowJacket Coils, Extreme TSC, Full Nismo N1 Bodykit, Greddy Speed Cut Controller, HKS Turbo Timer, 280LPH Denso Fuel Pump, Nismo Slave Cylinder, AMS BOVs, Nismo Clutch Pivot, ACT Xtreme 6 Puck and HDPP, Greddy Panel Filter
Comment
Comment