GreddyTrustGTR's Race Ready RB30!!

[greddytrustGTR]

Alas the time for me to part with my RB30, there is nothing wrong with it, it's only me that has recently developed a horniness for V8s and instead of having a perfectly good race engine sitting around I would rather give the chance to other GTRCers To own this engine.

It has less than 1500kms, just past break in, sold as a longblock, no turbos or tranny just the Intake manifold.

Im on my phone on tapatalk rite now but if u want details on the engine go to my build thread and there is a whole spec sheet, I will be postin it here when I get home.

the starting price is $13,000
Engine is in Ottawa but willing to ship at buyers expense
Price is negotiable, shoot me offers, but don't wast my time with ridiculously lowball offers if you do, I will publicly rip you apart and **** you 7 ways to Sunday, so it's up to you.

More info on this sale when I get home

[greddytrustGTR]

here is the full spec sheet on the block,

Block:
- Acid dipped and Fully Prepped Genuine Nissan RB30 Block
- Bored to suit new custom forged pistons
- Custom Billet Rods
- R.I.P.S Block Brace and 4WD adapter kit
- ACL race series bearings
- Genuine Tomei Oil Pump
- Custom Wide oil pump drive
- Genuine N1 Waterpump
- R.I.P.S Custom high Capacity baffled sump
- R.I.P.S Custom mods to Oil System and Gallery
- All New Genuine Nissan Frost Plugs and Oil Gallery Plugs
- Nitrated, Blueprinted and Balanced RB30 Crankshaft
- ATi 1500hp Front Pulley/Damper
- New Genuine Nissan Lower Cambelt Drive Gear, Washers and Keys
- New Genuine Nissan Idler and Tensioner Bearings
- Gates Race Spec RB30 Timingbelt

Head:
- Fully Ported and Polished RB26 Head
- 5 Angle Valve Job
- Ferrea Super Special Alloy Valves
- Ferrea Custom High Pressure Valve Springs (Good for 11,500rpm apparently)
- Ferrea Custom Titanium Retainers
- Ferrea Custom Valve Guides
- HKS 272 degree Intake Cam
- HKS 272 degree Exhaust Cam
- HKS Adjustable Cam Gears
- ARP RB25 Head Studs
- APEX'i Metal Head Gasket
- All New Genuine Nissan Valve Seals, ETC.


just to give you an idea of what i paid, the block cost me $14,372 CDN landed in Ottawa, the head was another $5,000 CDN.

will throw in old school valve covers that i just got haha.

and if i dont sell this engine, i will throw it in a Datsun Pickup with a single turbo and daily it at low boost haha.

[DJ]

13000 wtf!Someone jump on this deal...he wanted to sell me the head for 10g

[Oakville]

youve gotta be kidding me...damn thats a deal.

[greddytrustGTR]

oil pan alone is worth ~$1200

pics of the engine while it was being built



















forgot to mention it comes with a Sard Fuel Rail

[cortexx]

got a pic of it in 1 piece ?

[NismoS-tune]

Who built it? Who did the head work/porting... Which company would you be using to ship with? Custom work done by who? Hard break-in or soft? What was the compression numbers before pulling out otherwise I'd assume issues?

[archaeic_bloke]

Stunning, Good luck with the sale, Bump for a good guy!

[greddytrustGTR]

Who built it? Who did the head work/porting... Which company would you be using to ship with? Custom work done by who? Hard break-in or soft? What was the compression numbers before pulling out otherwise I'd assume issues?

- The Short Block was built by Rotorua Import Pro Shops in Rotorua New Zealand (known for they're 7.8 seconds RB30 Powered 240z http://ripsltd.com/about.html)
- The Headwork was done at Pocket Rockets here in Ottawa (they are known more for they're work on race bikes and American V8's)
- Soft 2000km break in
- Compression was still 180% across the board

and assume all you want I'm not forcing you to buy it

[lalex]

if you'r willing to sell the head alone let me know!

[greddytrustGTR]

forgot to mention this comes with the Okada Coils and the RC1600cc Injectors

[gc613]

bumpp for a sick set up

[greddytrustGTR]

Also forgot to mention comes with a custom stage 5 bully clutch, never slipped and holds up to 1200whp

[gtrjon]

why are you getting rid of your set up?

[4jo3]

Willing to part out the coils?