Negative feedback on member

[steveo1502]

I feel your pain, bought some frp parts, first and last time I do that.

As for feedback it's a great guideline for knowing if the seller will indeed send you an item or is a decent guy but on a case by case bases it has flaws.

Was it the spats? I think all Frp fits like axx, I might have the same spats, half the price but twice the work to install, but in the end they look decent, I've heard of stuff called panel bond, but I just stuck mine on with silicone, pushed that stupid top corner closet to the door in until it dried, it was out like an inch, I think panel bond is permanent, I could still pull mine off if needed...... I think. U found a set of nismo spats? Seems most cf dosent fit we'll either, or take work to fit nice.

[Daryl @ RightDrive]

Many FRP products from reputable Japanese makers fit very well. Some people buy cheap Chinese knockoffs and expect them to fit perfectly. No going to happen.

[Fred-R]

Many FRP products from reputable Japanese makers fit very well. Some people buy cheap Chinese knockoffs and expect them to fit perfectly. No going to happen.

I hear you Daryl, but when the guy explains that the reason why he's selling the part twice the price is because it will fit great, i'm expecting the part to fit great, not like sh*t.....

Edit: I've learned my lesson...

[Daryl @ RightDrive]

I hear you Daryl, but when the guy explains that the reason why he's selling the part twice the price is because it will fit great, i'm expecting the part to fit great, not like sh*t.....

Edit: I've learned my lesson...

If you purchased a Japanese made Nismo style trunk lip then it should have fit perfect. I've sold tons of them, and had no problems.
I know the Chinese made ones fit like garbage, and that sounds like what you got. Sounds like you may have been duped into paying twice the price for a Chinese made part....
I don't know first hand, so I can't really speculate, but just stating my opinion based on my experience.

[Fred-R]

would a carbon fiber one fit better?

noob question: Is CF paintable?

[zac3ne2nr]

neither is very flexible. The Cf one is just a finish and overlay really. You'd really buy it for the Cf finish so painting it would hide the finish.
Anyway there are some good fitting reps out there. An OE one though was comparable in price enough for me to get the OE.

[felix yuen]

Hi
Thank you all for commenting on this thread.

Again regardless of what I am selling, who I am selling to, how much the product is worth
All items are final, means no refund n no exchange
I m not Walmart, nor superstore... I m just a local car enthusiast selling what I don't need.

You mention Charles can issue a refund cuz he sent u the wrong item, that's because he's running a business, his parts are sold for profit, and as you mentioned he "shipped u the wrong" parts.

So back on topic, the part I sold you "if I rmb correct" was a TBO Nismo style trunk lip. and TEC was a local company that sells parts directly from Japan where his supplier was TBO direct. I got this item from them and also have that exact item on my car, and it fits perfect done by the body shop.

An as 90% of the people who replied no this thread stated, ALL FRP products will require body work to make it fit perfectly like OEM.
If you are no confident on installing the lip your self, please go to a certified professional body shop to get this installed. Last thing we want is having this lip fly off ur turn on the hwy killing people if not correctly installed.

Again it's not the dollar amount on the product that will determine the fitment. Is the fact that all Frp products are Frp, they dont fit perfect without work and they certainly isn't bolt on

I had spent $3000 on my VIP Noblesse kit on my fit, and still require a lot of work to fit
If you rmb William Wong's Matt blk r32 with the real Final Konnection kit, his kit was $3500 and on top another 2 weeks in the body shop to have it Fitfteak properly.

[felix yuen]

hey,



i bought a nismo style trunk lip for my r32 gtr made of frp (i know frp usually doesn't fit well without a little work), but when you ask the guy (who's supposed to be a reputeable seller) why he's asking like twice the price of anywhere else and then says: Mine isn't knock off chinese bs and it will sit perfect: You don't expect it to fit like ****!!??



it's only a question of respect and keeping your name out of the dirt...

What you guys think?

as you stated, i ripped u off by selling u a tbo nismo style trunk lip @ double the price
please do not use false information to let reader stand on your side OR confuse them with ur real facts.

the product i sold to you was $165cnd shipped to quebec from vancouver via canada post including paypal fee.
if i rmb correctly, due to the length of the box, shipping was $40-50cnd
therefore the lip only costed you $110cnd, it was brand new too so it was no where near double the price as you mentioned.

here are the proves.

[felix yuen]

A member of this community commented on my ethics as a human being base on this thread.
so base on good ethics, i will help you source another part that will suit your need so.....

Here if you havnet found a replacement yet
you can buy from them, more exp, but again no guarantee on fitment either. but i suggest u go to a body shop this time.

this part is about $250, it is from a japanese frp parts maker

http://www.rhdjapan.com/fujimura-auto-rocket-dancer-aero-chibbiko-trunk-spoiler-frp-skyline-gt-r-bnr32-67928

[felix yuen]

I don't know first hand, so I can't really speculate, but just stating my opinion based on my experience.

thanks daryl for not jumping into conclusion before knowing the facts unlike other members on this forum.

[Fred-R]

Finally,

It took you some time to answer on this thread.. It took you time to answer my PMs back too...

Remember when we've texted about this spoiler? I told you I've found a knockoff one for like 80 bucks shipped... You told me yours wasn't some knockoff chinese item that will fit like crap.... I've trusted what you said and paid, as you said, 165 for yours (twice the price)....

When I've received the wing, my car was stored for winter and had no time to check if everything was ok... About a month ago, I went to check/fit the wing, I realize that the 2 slots where the oem gtr wing slides are too close from each other and I have to ''enlarge'' them to be ok... I say no big deal, a little dremel and I'm good to go... Tried to fit the wing again after the little mod and surprise: it sits like CRAP on the trunk! 1/4 of an inch is not what I call a good fit!!??

When you've finally answered my PMs, you've told me to fill the gap with glue or something!!! wtf, i mean, do I have to make a drawing of what it's gonna look like...? I don't think anybody here who is even just a bit proud of their skyline would fill an esthetic part with glue....

I don't care if you run a business or not, I'm not running a business btw and like I said, it once happened that I sold a part wich didn't fit as expected: I've fully refunded the buyer... It's only a matter of respecting and helping each other here. Not taking advantage of others...

It took me quite some time to pull your name out, it's just not my style. But I 'm a little pissed about the way you're acting....

Edit: btw, the wing was a little chipped here and there when i got it, so for a brand new wing, not sure about that too....

[Fred-R]

A member of this community commented on my ethics as a human being base on this thread.
so base on good ethics, i will help you source another part that will suit your need so.....

Here if you havnet found a replacement yet
you can buy from them, more exp, but again no guarantee on fitment either. but i suggest u go to a body shop this time.

this part is about $250, it is from a japanese frp parts maker

http://www.rhdjapan.com/fujimura-auto-rocket-dancer-aero-chibbiko-trunk-spoiler-frp-skyline-gt-r-bnr32-67928

I can't afford to buy another wing. If I decide to buy one, I'll make sure it fits...

[felix yuen]

hi
thanks again for commenting back,
and i am sorry i took a while to reply, i actually have very busy work schedule so i am not able to come read every thread.

glue or as i should use the proper term ( Epoxy ) is actually very common to be use on all body panels to make sure they secure properly, they use them on OEM cars or aftermarket panels.

in regards of not fitting right, again FRP is FRP and i am not going to go over that.

as for what you can afford, i can't control what you want to spend on ur cars. at the same time i can't control what you have to say about me, i am glad to accept your negative feedbacks, but if someone were to read into this thread, i have proven my self to be very legit already so i wont common more into that.

but as far a quality products, none comes cheap ! rmb what paid is what you get, especially when it comes to skylines, it will cost more then fixing up a civic.

[cooke24]

i back felix on this one.... felix has been here and involved in the community for a long time.

you have to calculate shipping into the price. that $80 one you mentioned probably would of ended up being the same price shipped.

i hate to say this but you bought the replica and your not happy the way it fits....should of bought an oem nismo one.

as for returns, when i buy stuff off this or any other forum i assume its final, when i sell its final.

[support@feastauto]

Fred I often see 2nd hand OEM pieces for fairly cheap and also there are many FRP made in Japan that fit well. Email if you need some pricing.